/[cvs]/joko/doc/SampleTasks/joko_2003-03.twingle

Diff of /joko/doc/SampleTasks/joko_2003-03.twingle

Parent Directory | Revision Log | View Patch Patch

-revision 1.9 by joko,
Fri Mar  7 20:56:02 2003 UTC
+revision 1.40 by joko,
Tue Mar 11 06:25:59 2003 UTC
 Line 12
  @cvs-info
    $Id$
    $Log$
+   Revision 1.40  2003/03/11 06:25:59  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.39  2003/03/11 05:56:44  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.38  2003/03/11 05:26:23  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.37  2003/03/11 04:25:58  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.36  2003/03/11 02:55:54  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.35  2003/03/11 01:55:57  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.34  2003/03/10 23:55:51  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.33  2003/03/10 18:55:55  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.32  2003/03/10 17:56:05  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.31  2003/03/10 16:25:55  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.30  2003/03/10 03:56:32  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.29  2003/03/10 03:27:24  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.27  2003/03/09 19:56:04  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.25  2003/03/08 23:26:21  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.24  2003/03/08 22:56:30  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.23  2003/03/08 18:26:20  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.21  2003/03/08 14:26:13  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.20  2003/03/08 13:56:42  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.19  2003/03/08 12:56:24  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.18  2003/03/08 12:27:20  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.17  2003/03/08 11:27:00  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.16  2003/03/08 08:56:05  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.15  2003/03/08 07:55:59  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.14  2003/03/08 07:25:57  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.13  2003/03/08 05:56:38  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.12  2003/03/08 05:25:54  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.11  2003/03/08 04:55:46  joko
+   + AUTOCOMMIT: updated/added content
+   Revision 1.10  2003/03/07 22:26:20  joko
+   + AUTOCOMMIT: updated/added content
    Revision 1.9  2003/03/07 20:56:02  joko
    + AUTOCOMMIT: updated/added content
-Line 362 
 o .phpdocrc: Tie::IxHash
+Line 446 
 o .phpdocrc: Tie::IxHash
    -> Evolution
    -> Mahogany
+ @sequence block
+ @written
+ @date 2003-03-07
  - janosch: pdf-gateway!?
  o setup ->colorize on quepasa.netfrag.org
-Line 375 
 o refactor DesignPattern::MVC
+Line 465 
 o refactor DesignPattern::MVC
       between Subject and Observer sits a ChangeManager acting as mediator (is-a DesignPattern::Mediator)
       @see http://selab.korea.ac.kr/selab/courses/GoF-patterns/observer.htm
+ o Twingle!
+   o twingle -> dispatchmail (Twingle::Mail)
+   o twingle -> twingledoc (Twingle::Doc)
+ o refactor to "twingled/":
+   o http://netfrag.org/~joko/computing/overview/topics/topics/
+   o http://netfrag.org/~joko/computing/overview/topics/SampleTasks/
+ o update http://netfrag.org/~joko/computing/overview/topics/topics.html
+ x re-enable Yakka
+ o setup phpDocumentor from cvs
+ o "subscribe" a Folder (using rss/rdf!)
+ o Arial (or similar font w/o serifs) for Mozilla!
+ o edit preferences: Font (family, size)
+ o debian-upgrade -> perl-upgrade => missing CPAN packages =>
+   o check in intervals:
+     o /data/opt/dispatchmail/bin/dispatchmail
+       --- snip ---  [/var/log/mail.log]
+       Mar  8 07:15:51 quepasa sm-mta[30731]: h286FmeE030726: to=|"/data/opt/dispatchmail/bin/dispatchmail --base=/home/joko/virtual/joko_mail", ctladdr=<joko_mail@quepasa.netfrag.org> (1000/100), delay=00:00:03, xdelay=00:00:01, mailer=prog, pri=30962, dsn=5.3.0, stat=unknown mailer error 2
+       Mar  8 07:15:51 quepasa sm-mta[30731]: h286FmeE030726: h286FpeD030731: DSN: unknown mailer error 2
+       Mar  8 07:15:52 quepasa sm-mta[30731]: h286FpeD030731: to=|"/data/opt/dispatchmail/bin/dispatchmail --base=/home/joko/virtual/joko_mail", ctladdr=<joko_mail@quepasa.netfrag.org> (1000/100), delay=00:00:01, xdelay=00:00:01, mailer=prog, pri=31986, dsn=5.3.0, stat=unknown mailer error 2
+       Mar  8 07:15:52 quepasa sm-mta[30731]: h286FpeD030731: h286FpeE030731: return to sender: unknown mailer error 2
+       Mar  8 07:15:53 quepasa sm-mta[30731]: h286FpeE030731: to=|"/data/opt/dispatchmail/bin/dispatchmail --base=/home/joko/virtual/joko_mail", ctladdr=joko_mail (1000/100), delay=00:00:01, xdelay=00:00:01, mailer=prog, pri=33010, dsn=5.3.0, stat=unknown mailer error 2
+       Mar  8 07:15:53 quepasa sm-mta[30731]: h286FpeD030731: Saved message in /var/lib/sendmail/dead.letter
+       --- snip ---
+       Can't locate Hash/Merge.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.0 /usr/local/share/perl/5.8.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.0 /usr/share/perl/5.8.0 /usr/local/lib/site_perl .) at ./dispatchmail line 34.
+       BEGIN failed--compilation aborted at ./dispatchmail line 34.
+       x perl -MCPAN -e "install Hash::Merge"
+         dependencies resolved automagically: ->Clone
+     o /data/opt/dispatchmail/bin/postmessage
+       --- snip ---  [/var/log/mail.log]
+       Mar  8 07:26:40 quepasa sm-mta[30953]: h286Q5eE030946: to=|/data/opt/dispatchmail/bin/dispatchmail, ctladdr=<links-computing@netfrag.org> (1014/1014), delay=00:00:32, xdelay=00:00:22, mailer=prog, pri=47232, dsn=5.3.0, stat=unknown mailer error 2
+       Mar  8 07:26:41 quepasa sm-mta[30953]: h286Q5eE030946: h286QfeD030953: DSN: unknown mailer error 2
+       Mar  8 07:26:47 quepasa sm-mta[30946]: h286Q5eG030946: collect: premature EOM: unexpected close
+       Mar  8 07:26:47 quepasa sm-mta[30946]: h286Q5eG030946: collect: unexpected close on connection from pD9E77CD4.dip.t-dialin.net, sender=<andreas.motl@ilo.de>
+       --- snip ---
+       Can't locate News/Article.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.0 /usr/local/share/perl/5.8.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.0 /usr/share/perl/5.8.0 /usr/local/lib/site_perl .) at ./postmessage line 8.
+       BEGIN failed--compilation aborted at ./postmessage line 8.
+       x perl -MCPAN -e "install News::Article"
+     o /data/opt/dispatchmail/bin/buildmail
+       Can't locate MIME/Lite.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.0 /usr/local/share/perl/5.8.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.0 /usr/share/perl/5.8.0 /usr/local/lib/site_perl .) at ./buildmail line 7.
+       BEGIN failed--compilation aborted at ./buildmail line 7.
+       x perl -MCPAN -e "install MIME::Lite"
+     o /data/opt/dispatchmail/bin-tests/build_dispatch_mode mail2news alt.test
+       DesignPattern::Bridge->load: Can't locate mixin/with.pm in @INC (@INC contains: /data/libs/nfo/perl/libs /etc/perl /usr/local/lib/perl/5.8.0 /usr/local/share/perl/5.8.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.0 /usr/share/perl/5.8.0 /usr/local/lib/site_perl .) at /data/libs/nfo/perl/libs/Mail/Audit/Dispatch/Newsgate.pm line 6, <STDIN> line 16.
+       BEGIN failed--compilation aborted at /data/libs/nfo/perl/libs/Mail/Audit/Dispatch/Newsgate.pm line 6, <STDIN> line 16.
+       Compilation failed in require at (eval 6) line 1, <STDIN> line 16.
+       BEGIN failed--compilation aborted at (eval 6) line 1, <STDIN> line 16.
+        (/data/libs/nfo/perl/libs/Mail/Audit/Dispatch.pm:193)
+       Can't locate object method "Newsgate" via package "Mail::Audit::Dispatch" at /data/libs/nfo/perl/libs/Mail/Audit/Dispatch.pm line 194, <STDIN> line 16.
+       x perl -MCPAN -e "install mixin"
+     o check okay:
+       --- snip ---  [/var/log/mail.log]
+       Mar  8 07:45:55 quepasa sm-mta[31471]: h286jNeD031413: to=|"/data/opt/dispatchmail/bin/dispatchmail --base=/home/joko/virtual/joko_mail", ctladdr=<joko_mail@localhost> (1000/100), delay=00:00:32, xdelay=00:00:05, mailer=prog, pri=577260, dsn=2.0.0, stat=Sent
+       --- snip ---
+ o @lookup Data::Match - Complex data structure pattern matching [by Kurt A. Stephens]
+    @see also perl, Array::PatternMatcher, Data::Compare, Data::Dumper, Data::DRef, Data::Walker
+ o make up a notation which can explicit describe component far away
+    e.g. CPAN--Hash::Merge
+ o @lookat News::FormReply News::FormArticle News::AutoReply
+ x updated phpDocumentor to version from cvs
+   o trying to get uml-rendering working
+     x apt-get install dia
+     x apt-get install dia2code
+ x setup org.droogs--Autodia: location http://www.droogs.org/autodia/
+   #> cd /tmp
+   #> /data/opt/tools/Autodia-1.4/autodia.pl -l php -i * -p /data/www/virtual/netfrag/docs/nfo/code/flib -O
+   x setup CPAN--Template: perl -MCPAN -e "install Template"
+   ->CPAN--TT2
+   ->CPAN--Splash!
+       Which Splash! colour scheme would you like to use to build the
+       documentation?  Acceptable values are:
+         Name     Colours
+         -------------------------
+         default  lilac/mauve
+         aqua     aqua/marine
+         blue     grey75/blue75
+         green    grey75/green75
+         grey     grey75/grey50
+         leon     red75/orange/white/black
+         red      grey75/red75
+       Enter name of colour scheme:  [default]
+   ->CPAN--AppConfig
+   ->CPAN--GD
+     CPAN.pm: Going to build L/LD/LDS/GD-2.06.tar.gz
+     NOTICE: This module requires libgd 2.0.5 or higher.
+     ->Debian--libgd2: apt-get install libgd2 libjpeg62 libpng2 xlibs zlib1g
+       ->Debian--debconf ->Debian--nethack-common ->Debian--xfree86-common
+           !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+           Installing new version of config file /etc/X11/Xsession.d/99xfree86-common_start ...
+            Adding system startup for /etc/init.d/xfree86-common ...
+              /etc/rcS.d/S70xfree86-common -> ../init.d/xfree86-common
+           !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+           Setting up X server socket directory /tmp/.X11-unix...done.
+           Setting up xlibs (4.2.1-6) ...
+           ->CPAN--Math::Trig
+        ->Debian--libgd2-xpm: apt-get install libgd2-xpm libgd2-xpm-dev
+           #> cd /.cpan/build/GD-2.06
+           #> make
+   x some further library-patches: cd /usr/lib
+     #> ln -s ln -s libperl.so.5.8 libperl.so
+     #> ln -s libpng.so.2 libpng.so
+     #> ln -s libfreetype.so.6 libfreetype.so
+     #> ln -s libjpeg.so.62 libjpeg.so
+   x test:
+     #> ld -l png|jpeg|freetype|perl|X11
+     X11 still fails with make GD!!!
+     #> cd /.cpan/build/GD-2.06
+     #> make
+       /usr/bin/ld: cannot find -lX11
+       collect2: ld returned 1 exit status
+       make: *** [blib/arch/auto/GD/GD.so] Error 1
+     #> apt-get install xlibs-dev
+     #> make
+     yai!
+     #> make test
+       t/GD..........ok 1/10libpng warning: Application was compiled with png.h from libpng-1.2.5
+       libpng warning: Application  is running with png.c from libpng-1.0.12
+       gd-png:  fatal libpng error: Incompatible libpng version in application and library
+     #> apt-get install libpng2-dev
+     #> apt-get install libjpeg62-dev
+       ... still the same error with "make test"
+     #> apt-get install libpng3 libpng3-dev
+     #> apt-get install libfreetype6-dev
+     The first output xml is seen! Great! Let's move on to graphviz:
+       Can't locate GraphViz.pm in @INC (@INC contains: /data/opt/tools/Autodia-1.4 /etc/perl /usr/local/lib/perl/5.8.0 /usr/local/share/perl/5.8.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.0 /usr/share/perl/5.8.0 /usr/local/lib/site_perl .) at /data/opt/tools/Autodia-1.4/Autodia/Diagram.pm line 336.
+     #> apt-get install graphviz
+     ???#> perl -MCPAN -e "install Template"
+     #> perl -MCPAN -e "install Graphviz"
+       ->CPAN--IPC::Run
+       ->CPAN--Graph
+       ->CPAN--Math::Bezier
+       ->CPAN--Heap
+     Freetype Font's do not work!
+     #> apt-get install freetype2-tools
+     #> apt-get install libttf-dev
+     #> apt-get install xfonts-scalable
+     #> apt-get install xfonts-base
+     #> apt-get install ttf-freefont
+           Freefont Serif, Sans and Mono Truetype fonts:
+           A set of free high-quality TrueType fonts covering the UCS character set.
+           These fonts are similar to the (in)famous Helvetica, Times and Courier fonts.
+           http://packages.debian.org/unstable/x11/ttf-freefont.html
+     (#> apt-get install ttf-xfree86-nonfree ttf-larabie-deco ttf-larabie-straight ttf-larabie-uncommon)
+     #> defoma-font register-all /etc/defoma/hints/ttf-freefont.hints
+   o enhance:
+       root@quepasa:/home/joko/public_html/test# ./.autodiarc
+       getting pattern for php
+       using directory : /data/www/virtual/netfrag/docs/nfo/code/org.netfrag.glib
+       recursively searching files..
+     o the "php-pattern" should also contain namespaces and stuff
+       (components gets instantiated by either 'mkObject' or 'php::mkComponent')
+       make this possible!
+ o quick (javascript) search for netfrag.org and packages.debian.org (xul?)
+ o phpDirectoryIndex: include Joshua Eichhorns 'auth' [[http://cvs.joshuaeichorn.com/cvsweb.cgi/auth/]]
+ @lookat http://cvs.joshuaeichorn.com/cvsweb.cgi/phpXmlTransform/
+ o autodia: enhance with "projects"
+    <-> couple with phpDocumentor
+ o phpDocumentor: try php 4.3.0 for having cross-indexed browsable source as an additional feature ;-)
+   o <-> link to pages prepared by Autodia
+   o add additional browser in top left frame for cross-domain-browsing (having multiple apis beside each other)
+   o the html-title! (make it unique!!!)
+ o for Autodia:
+   o resize images to a) 800x600 portrait and b) DIN A 4 square or s.th.l.th.
+     => x .autozoom -> zoomall -> zoommulti -> zoomone
+   o stamp picture with header and footer (little expressions for including predefined title, current filename, date, etc.!)
+   o idea: render as SVG???
+   o class- and package-diagrams:
+     o "Class" for relationships of Code- and DB-Schema-classes
+     o "Package" for relationships of code-packages
+   o integrate with phpDocumentor:
+     /data/opt/tools/phpdocumentor/phpDocumentor/Converters/HTML/frames/templates/phpedit/templates/left_frame.tpl
+   o Autodia-TODO:
+     Add ability to split projects into multiple diagrams and group contents of
+     a diagram/subdir into system boxes - much improving clarity in big
+     projects.
+ o glib-namespace aufr�umen!
+ o twingle
+   o what about "<pre>"-blocks?
+   o what about non-html-tags (e.g. <optional-var-name>)?
+    => we'll probably need a html-tag-db to solve this
+   o establish as RunnerAgent and IntervalRunnerAgent on quepasa!
+ o phpDocumentIndex
+   o recognize symlinked directories!!!
+   o integrate with ImageZoom written for Autodia
+     -> manipulate images: zoom, rotate
+   o sort order:
+     o default: show directories on top
+     o make changable through columns
+   o option to force view of hidden files (e.g. dot-files)
+   o 24h-time-format (no AM/PM)
+   o UML-Class-diagram-icon for tutorial!!!
+ o modify /etc/hosts entry by rule!!!!
+ o Yakka: automate reinstallation (new IntervalRunnerAgent) of libxml2
+   #> dpkg -i /home/bareface/public_html/yakka/data/libxml2_2.4.19-4_i386.deb
+   #> /etc/init.d/apache restart
+ o autozoom/runzoom
+   o from (e.g. test6/)
+   o to (e.g. test6/zoomed/)
+ o global "last-recent-error"-page for admin to view errors occouring
+   ->SystemErrors
+   ->StepProcessing: ./.runrc: update|build|publish
+ o clean up disks!!!
+   o h1.service.netfrag.org
+   o quepasa.netfrag.org
+ o natraj/sorceress: server-consolidation?
+ o monitor regularly: http://netfrag.org/docs/code/api/org.netfrag/errors.html
+ o DataSource::Generic <-> ObjectList!!!
+ o Yakka: (javascript-control):
+   o let CTRL + ENTER make a new para
+   o let CTRL + CTRL (double-hit) make a new page from WikiWord left of the cursor (splash into a new DHTML page!)
+ x root@quepasa:/data# apt-get install pdumpfs
+ o final solution for the libxml-problem?
+   root@quepasa:/home/service/backup# apt-get --fix-broken --show-upgraded --simulate dist-upgrade
+     Reading Package Lists... Done
+     Building Dependency Tree... Done
+     Correcting dependencies... Done
+     Calculating Upgrade... Done
+     The following packages will be REMOVED:
+       libxslt1 php4-domxml
+packages upgraded, 0 newly installed, 2 to remove and 0  not upgraded.
+     Remv libxslt1 (1.0.27-1 ) [php4-domxml ]
+     Remv php4-domxml (4:4.2.3-11 )
+   root@quepasa:/tmp# apt-get install pdumpfs
+     Reading Package Lists... Done
+     Building Dependency Tree... Done
+     You might want to run `apt-get -f install' to correct these:
+     Sorry, but the following packages have unmet dependencies:
+       libxslt1: Depends: libxml2 (>= 2.5.0-1) but 2.4.19-4 is to be installed
+       php4-domxml: Depends: libxml2 (>= 2.5.0-1) but 2.4.19-4 is to be installed
+     E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
+   x dpkg --force-depends -r libxml2
+   o dpkg-liftpackage libxml2_2.4.19-4_i386.deb 2.5.0-1
+     x dpkg-deb -x libxml2_2.4.19-4_i386.deb fakepkg
+     x dpkg-deb -e libxml2_2.4.19-4_i386.deb
+     x mv DEBIAN fakepkg/
+     x dpkg-deb --build fakepkg libxml2_2.4.19-4_i386_fake_2.5.0-1.deb
+     x dpkg -i libxml2_2.4.19-4_i386_fake_2.5.0-1.deb

 Legend:



Removed from v.1.9
 


changed lines


 
Added in v.1.40
 Legend:



Removed from v.1.9
 


changed lines


 
Added in v.1.40
-Removed from v.1.9
+Added in v.1.40

MailToCvsAdmin">MailToCvsAdmin	ViewVC Help
Powered by ViewVC 1.1.26