| 1 |
@topic mirc-session |
| 2 |
@injected |
| 3 |
@origin grasshopper.netfrag.org/c/var/log/mirc/#nfo.IRCNet.20030103.log |
| 4 |
|
| 5 |
14:58 <bareface> joko was gehdn :-) |
| 6 |
15:00 <[joko]> Name Service Switch has changed in the C Library. |
| 7 |
15:00 <[joko]> Running programs may not be able to do NSS lookups until they are |
| 8 |
15:00 <[joko]> restarted (for services such as ssh, this can affect your ability to |
| 9 |
15:00 <[joko]> login). |
| 10 |
15:00 <[joko]> Note: restarting sshd should not affect any existing connections. |
| 11 |
15:00 <[joko]> The services detected are: inetd snmpd cron apache ssh sendmail |
| 12 |
15:00 <[joko]> If other services begin to fail mysteriously after this upgrade, |
| 13 |
15:00 <[joko]> it may be necessary to restart them too. |
| 14 |
15:00 <[joko]> Do you wish to Restart Services? [Y/n] |
| 15 |
15:00 *** psYdeQ (psYdeQ@B8e90.pppool.de) has joined #nfo |
| 16 |
15:00 <psYdeQ> mOin.. |
| 17 |
15:00 <[joko]> Restarting services possibly affected by the upgrade: |
| 18 |
15:01 <[joko]> inetd: stopping...starting...done. |
| 19 |
15:01 <[joko]> snmpd: stopping...starting...done. |
| 20 |
15:01 <[joko]> cron: stopping...starting...done. |
| 21 |
15:01 <[joko]> apache: stopping...starting...done. |
| 22 |
15:01 <[joko]> ssh: stopping...starting...done. |
| 23 |
15:01 <[joko]> sendmail: stopping...starting...done. |
| 24 |
15:01 <[joko]> Services restarted succesfully! |
| 25 |
15:01 <[joko]> Current default timezone: 'Europe/Berlin'. |
| 26 |
15:01 <[joko]> Local time is now: Fri Jan 3 14:59:27 CET 2003. |
| 27 |
15:01 <[joko]> Universal Time is now: Fri Jan 3 13:59:27 UTC 2003. |
| 28 |
15:01 <[joko]> Run 'tzconfig' if you wish to change it. |
| 29 |
15:01 <[joko]> Setting up libdb1-compat (2.1.3-7) ... |
| 30 |
15:01 <[joko]> moin ;) |
| 31 |
[...] |
| 32 |
15:03 <[joko]> Removing php4 ... |
| 33 |
15:03 <[joko]> sin druff |
| 34 |
15:05 <[joko]> taugt nei |
| 35 |
15:05 <[joko]> greets vom rabit |
| 36 |
15:14 <[joko]> okay bareface, 4.2.3 läuft schomal |
| 37 |
[...] |
| 38 |
15:18 <[joko]> da is die info-screen: http://netfrag.org/horde/test.php?mode=phpinfo |
| 39 |
15:19 <[joko]> apt-get install php4-xslt |
| 40 |
15:19 <[joko]> Unpacking replacement php4-xslt ... |
| 41 |
15:19 <[joko]> Setting up php4-xslt (4.2.3-8) ... |
| 42 |
15:19 <[joko]> phpinfo: xslt |
| 43 |
15:19 <[joko]> XSLT support enabled |
| 44 |
15:21 <bareface> geil ! |
| 45 |
15:21 <bareface> oida brauch noch domxml :-) |
| 46 |
15:21 <bareface> korregt |
| 47 |
[...] |
| 48 |
15:23 <[joko]> apt-get install php4-gd php4-imap php4-ldap php4-mcal php4-mhash php4-mysql |
| 49 |
15:23 <[joko]> The following extra packages will be installed: |
| 50 |
15:23 <[joko]> libc-client2002 libfreetype6 libgd1-xpm libkrb53 libpng12-0 |
| 51 |
15:23 <[joko]> The following NEW packages will be installed: |
| 52 |
15:23 <[joko]> libc-client2002 libgd1-xpm libkrb53 libpng12-0 php4-mcrypt |
| 53 |
15:23 <[joko]> ;) |
| 54 |
15:23 <[joko]> apachectl graceful |
| 55 |
15:24 <[joko]> okay - schaut guad aus |
| 56 |
15:24 <[joko]> mal alles testen, ob's noch funzt.... |
| 57 |
15:29 <[joko]> jo, scheint zu gehen ois |
| 58 |
15:43 <[joko]> 15:21 <bareface> oida brauch noch domxml :-) |
| 59 |
15:43 <[joko]> ahh |
| 60 |
15:44 <[joko]> apt-get install php4-domxml |
| 61 |
15:44 <[joko]> The following extra packages will be installed: |
| 62 |
15:44 <[joko]> libxml2 |
| 63 |
15:45 <[joko]> Setting up libxml2 (2.4.30-1) ... |
| 64 |
15:45 <[joko]> Setting up php4-domxml (4.2.3-8) ... |
| 65 |
15:46 <[joko]> domxml |
| 66 |
15:46 <[joko]> DOM/XML enabled |
| 67 |
15:46 <[joko]> libxml Version 2.4.30 |
| 68 |
15:46 <[joko]> HTML Support enabled |
| 69 |
15:46 <[joko]> XPath Support enabled |
| 70 |
15:46 <[joko]> XPointer Support enabled |
| 71 |
15:46 <[joko]> ;) all right |
| 72 |
[...] |
| 73 |
18:12 <bareface> du joko - irgendwas stimmt da noch ned |
| 74 |
[...] |
| 75 |
18:12 <[joko]> jo? |
| 76 |
18:13 <[joko]> wasn? |
| 77 |
18:13 <bareface> url: http://www.netfrag.org/~bareface/yakka/yakka.php |
| 78 |
[...] |
| 79 |
18:14 <bareface> gegen null |
| 80 |
18:14 <bareface> :-) |
| 81 |
18:14 <bareface> joko ich glaub ich habs |
| 82 |
18:15 <bareface> mom |
| 83 |
18:16 <bareface> joko |
| 84 |
18:16 <bareface> register_globals is on.... |
| 85 |
18:16 <bareface> hmm |
| 86 |
18:16 <bareface> obs wohl daran liegt |
| 87 |
18:16 <bareface> bei mir is immer off |
| 88 |
18:16 <bareface> mal sehn |
| 89 |
18:20 <[joko]> alles klar |
| 90 |
18:20 <[joko]> jo da in der richtung kann evtl. beliebig schlimmes an bzw. aus sein... |
| 91 |
18:20 <[joko]> kannste die php.ini einsehen als bareface? |
| 92 |
18:20 <[joko]> ich denk des müsst gehn |
| 93 |
18:20 <bareface> wo liegt die |
| 94 |
18:22 <pa_X> [joko]<. hmm, weiss jetzt au ned auswendig |
| 95 |
18:22 <pa_X> machma "locate php.ini" |
| 96 |
18:22 <pa_X> asooo |
| 97 |
18:22 <pa_X> stop |
| 98 |
18:22 <pa_X> steht im phpinfo drinne |
| 99 |
18:22 <pa_X> vierter block von oben |
| 100 |
18:22 <pa_X> fast ganz oben also |
| 101 |
18:23 <pa_X> des is immer die die gerade aktiv iss |
| 102 |
[...] |
| 103 |
18:34 <[joko]> so |
| 104 |
18:35 <[joko]> hjier wieda |
| 105 |
18:35 <bareface> so joko |
| 106 |
18:35 <bareface> an register_globals lags nich |
| 107 |
18:35 <bareface> sehr strange |
| 108 |
18:35 <[joko]> ne jetz wart ma |
| 109 |
18:35 <bareface> file permissions (read) sin au gesetzt |
| 110 |
18:35 <[joko]> evtl. isses in den user-verzeichnissen (~) garnich aktiv |
| 111 |
18:35 <[joko]> ... |
| 112 |
18:35 <[joko]> !?! |
| 113 |
18:35 <[joko]> ahh |
| 114 |
18:35 <[joko]> dns error |
| 115 |
18:35 <[joko]> macht der nen redirect? |
| 116 |
18:36 <[joko]> scheint mir fast so |
| 117 |
18:36 <[joko]> auf "localhost" evtl.? |
| 118 |
18:36 <bareface> hmm |
| 119 |
18:36 <bareface> könnt sein |
| 120 |
18:36 <bareface> das is ne idee |
| 121 |
18:36 <[joko]> ;) |
| 122 |
18:36 <bareface> logo oida |
| 123 |
18:36 <bareface> wart mal kurz |
| 124 |
18:36 <[joko]> ;) logn - cool |
| 125 |
18:37 <[joko]> des iss dann leider so des typische verhalten |
| 126 |
18:39 <bareface> hmm |
| 127 |
18:39 <bareface> mom noch |
| 128 |
18:40 <[joko]> jo logo |
| 129 |
18:40 <[joko]> bin schon noch bei dir ;) |
| 130 |
18:40 <bareface> logn :-) |
| 131 |
[...] |
| 132 |
18:43 <bareface> hmm joko |
| 133 |
18:43 <bareface> also ich hab jetz alle vars geprüft |
| 134 |
18:43 <bareface> passd |
| 135 |
18:44 <bareface> ich glaub ich hab nochn anderes prob |
| 136 |
18:44 <bareface> strange |
| 137 |
18:44 <bareface> denn ich mach keine redirects |
| 138 |
18:44 <bareface> und bei mir (apache 1.3.27 und php4.2.3) läufts straight forward |
| 139 |
18:44 <bareface> mal sehn |
| 140 |
18:48 <bareface> shit funzt ned - und ich hab k.a. worans ligd |
| 141 |
18:52 <[joko]> so re |
| 142 |
18:52 <[joko]> sorry |
| 143 |
18:53 <[joko]> kurz (länger) am klo gwesen |
| 144 |
18:53 <[joko]> alles klar |
| 145 |
18:53 <[joko]> k |
| 146 |
18:53 <[joko]> ich geh der sache nach |
| 147 |
18:54 <[joko]> kannste kurz raus aus den files gre |
| 148 |
18:54 <[joko]> gehen? |
| 149 |
18:57 <bareface> mom ich bin ganz nah dran |
| 150 |
18:58 <bareface> ich glaub es liegt am dom |
| 151 |
18:58 <bareface> domxml |
| 152 |
18:58 <[joko]> ahh krass |
| 153 |
18:58 <bareface> aus welchen files meinste denn ? |
| 154 |
18:59 <[joko]> ne passt scho |
| 155 |
18:59 <[joko]> kommt ja was |
| 156 |
18:59 <[joko]> bist ja auch dran.... |
| 157 |
18:59 <bareface> schon schon |
| 158 |
18:59 <[joko]> schon schon |
| 159 |
18:59 <[joko]> hmmm hmmm |
| 160 |
18:59 <[joko]> alles klar |
| 161 |
18:59 <[joko]> moment |
| 162 |
18:59 <[joko]> ich schau mal was bzw. ob was in der errorlog kommt |
| 163 |
19:00 <[joko]> [Fri Jan 3 18:58:36 2003] [notice] child pid 9282 exit signal Segmentation fault (11) |
| 164 |
19:01 <bareface> uuups |
| 165 |
19:01 <[joko]> ahh |
| 166 |
19:01 <[joko]> Unable to load dynamic library '/usr/lib/php4/20020429/recode.so' |
| 167 |
19:01 <[joko]> und noch'n paar andere anscheinend |
| 168 |
19:01 <[joko]> sooryyy ;( |
| 169 |
19:01 <bareface> hmm |
| 170 |
19:01 <bareface> shit |
| 171 |
19:02 <bareface> ich hatte schon die func |
| 172 |
19:02 <bareface> beim dump_node hats ihn zerlegt |
| 173 |
19:02 <bareface> und was nu? |
| 174 |
19:03 <[joko]> ich mach |
| 175 |
19:03 <[joko]> mom |
| 176 |
19:03 <[joko]> fehlen anscheinend noch ein paar pakete |
| 177 |
19:03 <bareface> shit sorry |
| 178 |
[...] |
| 179 |
19:10 <bareface> so re |
| 180 |
19:11 <bareface> joko wie schauts aus |
| 181 |
19:15 <bareface> was fehlt denn so alles ? |
| 182 |
19:15 <bareface> krass |
| 183 |
19:16 <[joko]> jo |
| 184 |
19:16 <[joko]> jetz hab ich ein paar installiert |
| 185 |
19:16 <[joko]> gehts scho? |
| 186 |
19:16 <[joko]> oder unverändert? |
| 187 |
19:16 <[joko]> mcrypt fehlt noch |
| 188 |
19:17 <bareface> krass des verwende ich garned ? |
| 189 |
19:17 <bareface> ne gehd nich.... |
| 190 |
19:17 <bareface> hmm+ |
| 191 |
19:18 <bareface> des langweilt mich - php und xml is halt fürn arsch echt |
| 192 |
19:18 <[joko]> ne jetzt wart mal |
| 193 |
19:18 <[joko]> des muss ned an xml liegen |
| 194 |
19:20 <bareface> nee ich hab die zeile herausgefunden wo's ihn zerlegt |
| 195 |
19:20 <[joko]> ;) jea cool |
| 196 |
19:21 <[joko]> wos iss? |
| 197 |
19:21 <bareface> und da steht : $xmldoc->dump_node($xmldoc); |
| 198 |
19:21 <[joko]> achtung: apachectl graceful |
| 199 |
19:21 <bareface> und des is eine domxml-methode |
| 200 |
19:21 <[joko]> alles klar |
| 201 |
19:21 <bareface> hmm |
| 202 |
19:21 <bareface> und scho restarted ? |
| 203 |
19:21 <[joko]> glei |
| 204 |
19:21 <[joko]> dabei |
| 205 |
19:22 <bareface> :-) |
| 206 |
19:22 <bareface> sags bescheid |
| 207 |
19:22 <[joko]> jetzad |
| 208 |
19:22 <bareface> nope sorry |
| 209 |
19:23 <bareface> geh mal in yakka/library |
| 210 |
19:23 <bareface> da in YakkaXml |
| 211 |
19:23 <[joko]> aber er macht die ganze zeit segmentation-faults |
| 212 |
19:23 <bareface> und dann in methode toXmlElement |
| 213 |
19:23 <bareface> vor dump_node |
| 214 |
19:23 <bareface> einfach mal ein die("test"); |
| 215 |
19:23 <bareface> sollt noch gehn |
| 216 |
19:23 <bareface> nach dump_noe |
| 217 |
19:24 <[joko]> hmm |
| 218 |
19:24 <bareface> err node sollts nich mehr gehn |
| 219 |
19:24 <bareface> genau dort zerlegts ihn irgendwie |
| 220 |
19:24 <bareface> keine ahnung wieso |
| 221 |
19:24 <bareface> hastes? |
| 222 |
19:24 <[joko]> ich schau |
| 223 |
19:24 <[joko]> hm |
| 224 |
19:25 <[joko]> ne ich schau ob ich was find was des problem sein könnt |
| 225 |
19:25 <[joko]> des is ja quasi der erste aufruf an die domxml-library |
| 226 |
19:25 <[joko]> oder? |
| 227 |
19:25 <bareface> nope vorher parse ich ein ganzes xml-file mit xpath und so |
| 228 |
19:26 <bareface> aber das ist des erste mal wo ich ein dump_node ausführ |
| 229 |
19:26 <bareface> also praktisch des xml im memory als string wiederbekommen will |
| 230 |
19:26 <[joko]> aha |
| 231 |
19:26 <[joko]> aber vorher benutzte schon die gleiche lib oder wie? |
| 232 |
19:27 <bareface> logn vorher fett instanz |
| 233 |
19:27 <bareface> und xmlfile ins memory parsen |
| 234 |
19:27 <bareface> mit allem drum und dran |
| 235 |
19:27 <bareface> namespaces und so schrott |
| 236 |
19:27 <bareface> richtig heftig |
| 237 |
19:27 <bareface> tausend xpathexpressions |
| 238 |
19:27 <bareface> nur dort is des erste mal wo ich dump_node verwende |
| 239 |
19:28 <bareface> und deswegen auch die story wg. recode |
| 240 |
19:28 <bareface> ich glaube da versucht die lib das teil im memory als string irgendwie zu dekodieren |
| 241 |
19:28 <bareface> und dann krachts |
| 242 |
19:28 <[joko]> aha |
| 243 |
19:28 <[joko]> hab was |
| 244 |
19:28 <bareface> und was ? |
| 245 |
19:28 <[joko]> des php dort is nur mit "--with-dom=" kompiliert |
| 246 |
19:29 <bareface> aha... |
| 247 |
19:29 <[joko]> auf php.net steht noch was von: "--with-dom-xslt" und "--with-dom-exslt" |
| 248 |
19:29 <[joko]> kannste dahinsichtlich die beiden phpinfo's mal vergleichen? |
| 249 |
19:29 <[joko]> im "Configure Command"-block |
| 250 |
19:29 <bareface> logn mom |
| 251 |
19:31 <bareface> neee des is ok |
| 252 |
19:31 <bareface> mit dom |
| 253 |
19:31 <[joko]> aha: apt-get install libxslt1 |
| 254 |
19:31 <bareface> und mit xslt |
| 255 |
19:31 <bareface> aha aha |
| 256 |
19:33 <[joko]> und: apt-get install sablotron |
| 257 |
19:33 <bareface> genau |
| 258 |
19:33 <[joko]> (evtl. weil: '--enable-xslt' '--with-xslt-sablot=shared,/usr') |
| 259 |
19:33 <[joko]> ??? |
| 260 |
19:33 <[joko]> aha aha |
| 261 |
19:34 <bareface> ich hab hier noch was |
| 262 |
19:34 <bareface> libiconv |
| 263 |
19:35 <bareface> für encoding-konvertierungen |
| 264 |
19:35 <[joko]> aha |
| 265 |
19:35 <bareface> hmm - ich benutze iso-8859-1 |
| 266 |
19:35 <bareface> aber standard is utf-8 |
| 267 |
19:35 <bareface> könnt auch daran liegen |
| 268 |
19:35 <bareface> das würde erklären warums beim dump_node scheitert |
| 269 |
19:36 <[joko]> gibt's hier was (in php.ini): default_charset = "iso-8859-1" |
| 270 |
19:36 <[joko]> ich schalt das mal an |
| 271 |
19:38 <[joko]> hast du bei dir php 4.3.0? |
| 272 |
19:38 <bareface> nope des is nur für http-header |
| 273 |
19:38 <[joko]> zwengs "The DOM XML extension has been overhauled in PHP 4.3.0 to better comply with the DOM standard" |
| 274 |
19:38 <bareface> nee 4.2.3 |
| 275 |
19:38 <[joko]> hmm alles klar |
| 276 |
19:39 <bareface> jo oida mörci vielmals |
| 277 |
19:39 <bareface> aba ich glaub ich lasses jetz ma |
| 278 |
19:39 <bareface> mich nervts grad |
| 279 |
19:39 <bareface> werd nie wieda irgendein scheiss xml teil in php schreibn |
| 280 |
19:39 <bareface> ich schau mir den code noch genauer an |
| 281 |
19:40 <[joko]> jo fit |
| 282 |
19:40 <[joko]> ;) |
| 283 |
19:40 <bareface> ich werd jetz los |
| 284 |
19:40 <[joko]> ich schau hier auch weider ob ich irgendwas find |
| 285 |
19:40 <[joko]> alles klar |
| 286 |
19:40 <bareface> logn mörci |
| 287 |
19:40 <[joko]> jo bis zum näxtn mal |
| 288 |
19:40 <[joko]> ich schaus mir an |
| 289 |
19:40 <bareface> auf jd fall |
| 290 |
19:40 <bareface> ich schreib dir wenn ich weiter weiss |
| 291 |
19:40 <[joko]> müsste so wies aktuell is laufen - wenn die libs funzen würden - oder`? |
| 292 |
19:41 <bareface> absolut |
| 293 |
19:41 <bareface> des teil läuft hier auf 3 servern wie öl |
| 294 |
19:41 <bareface> 2 win / ein linux |
| 295 |
19:41 <bareface> alle 4.2.3 |
| 296 |
19:41 <bareface> linux=suse |
| 297 |
19:41 <bareface> hmm, evtl hilfts weida |
| 298 |
19:41 <[joko]> hmm |
| 299 |
19:41 <[joko]> jo |
| 300 |
19:42 <[joko]> merci auf jeden |
| 301 |
19:42 <bareface> aba ich glaub es is entweder irgendein lib ding oda es is igrendein kleinscheiss wg. der dump_node func |
| 302 |
19:42 <bareface> kein plan |
| 303 |
19:42 <bareface> naja, ich werd sehn |
| 304 |
19:42 <bareface> err wir werdn sehn |
| 305 |
19:43 <bareface> bis dahin schomal sersn |
| 306 |
19:43 <[joko]> [Fri Jan 3 19:41:50 2003] [notice] child pid 10066 exit signal Segmentation fault (11) |
| 307 |
19:43 <[joko]> jo logn |
| 308 |
19:43 <[joko]> bis denne |
| 309 |
19:43 <bareface> und mörci für den stress |
| 310 |
19:43 <bareface> :-) |
| 311 |
19:43 <bareface> sers |
| 312 |
19:43 *** bareface (~chatzilla@194.112.100.9) Quit (ChatZilla 0.8.9 [Mozilla rv:1.1/20020826]) |
| 313 |
[...] |
| 314 |
|
| 315 |
|
| 316 |
|
| 317 |
|
| 318 |
@topic quepasa.netfrag.org - from php-upgrade to super-upgrade (unstable/main) |
| 319 |
|
| 320 |
We had errors: |
| 321 |
[Fri Mar 7 07:48:07 2003] [error] PHP Parse error: parse error, expecting `']'' in /data/www/virtual/$ |
| 322 |
[Fri Mar 7 07:48:07 2003] [error] PHP Fatal error: Undefined class name 'interwikimap' in /data/www/v$ |
| 323 |
|
| 324 |
Try an upgrade? Yes! |
| 325 |
|
| 326 |
This would break a SuSE system! (see list of packages/libraries required below!!!) |
| 327 |
Let's see how it works out with GNU/Debian..... |
| 328 |
|
| 329 |
cd /usr/lib |
| 330 |
tar -czf php4-2003-03-08.tar.gz php4 |
| 331 |
tar -czf perl-2003-03-08.tar.gz perl |
| 332 |
tar -czf perl5-2003-03-08.tar.gz perl5 |
| 333 |
|
| 334 |
|
| 335 |
root@quepasa:/tmp# apt-get install php4 php4-cgi php4-curl php4-domxml php4-imap php4-snmp php4-xslt |
| 336 |
Reading Package Lists... Done |
| 337 |
Building Dependency Tree... Done |
| 338 |
The following extra packages will be installed: |
| 339 |
apache apache-common gcc-3.2-base libapache-mod-perl libasn1-6-heimdal libc-client2003debian libc6 |
| 340 |
libc6-dev libcomerr1-kerberos4kth libcompress-zlib-perl libconvert-uulib-perl libcurl2 libdb3 |
| 341 |
libdb4.0 libdbd-mysql-perl libdbi-perl libdigest-nilsimsa-perl libdigest-sha1-perl libexpat1 libgcc1 |
| 342 |
libgd-gd1-perl libgd-perl libhtml-parser-perl libkrb-1-kerberos4kth libkrb5-17-heimdal |
| 343 |
libmime-base64-perl libnet-perl libnet-ssleay-perl libperl5.8 libpgperl libpq3 |
| 344 |
libroken16-kerberos4kth libsablot0c102 libssl0.9.7 libstdc++5 libunix-syslog-perl libxml2 perl |
| 345 |
perl-base perl-doc perl-modules razor sablotron |
| 346 |
The following packages will be REMOVED: |
| 347 |
libdigest-md5-perl libnss-db libsablot0 libtime-hires-perl |
| 348 |
The following NEW packages will be installed: |
| 349 |
gcc-3.2-base libasn1-6-heimdal libc-client2003debian libcomerr1-kerberos4kth libdb4.0 |
| 350 |
libdigest-nilsimsa-perl libgd-gd1-perl libkrb-1-kerberos4kth libkrb5-17-heimdal libperl5.8 libpq3 |
| 351 |
libroken16-kerberos4kth libsablot0c102 libssl0.9.7 libstdc++5 |
| 352 |
35 packages upgraded, 15 newly installed, 4 to remove and 254 not upgraded. |
| 353 |
Need to get 26.7MB/28.5MB of archives. After unpacking 25.6MB will be used. |
| 354 |
Do you want to continue? [Y/n] |
| 355 |
|
| 356 |
Get:1 ftp://ftp.de.debian.org unstable/main libc6-dev 2.3.1-14 [2416kB] |
| 357 |
Get:2 ftp://ftp.de.debian.org unstable/main libc6 2.3.1-14 [3193kB] |
| 358 |
Get:3 ftp://ftp.de.debian.org unstable/main libexpat1 1.95.6-3 [54.8kB] |
| 359 |
Get:4 ftp://ftp.de.debian.org unstable/main gcc-3.2-base 1:3.2.3-0pre3 [121kB] |
| 360 |
Get:5 ftp://ftp.de.debian.org unstable/main libgcc1 1:3.2.3-0pre3 [53.9kB] |
| 361 |
Get:6 ftp://ftp.de.debian.org unstable/main libstdc++5 1:3.2.3-0pre3 [253kB] |
| 362 |
Get:7 ftp://ftp.de.debian.org unstable/main sablotron 0.97-6 [74.5kB] |
| 363 |
Get:8 ftp://ftp.de.debian.org unstable/main libsablot0c102 0.97-6 [288kB] |
| 364 |
Get:9 ftp://ftp.de.debian.org unstable/main libnet-perl 1:1.12-1 [110kB] |
| 365 |
Get:10 ftp://ftp.de.debian.org unstable/main perl-modules 5.8.0-17 [1947kB] |
| 366 |
Get:11 ftp://ftp.de.debian.org unstable/main libdb4.0 4.0.14-1 [260kB] |
| 367 |
Get:12 ftp://ftp.de.debian.org unstable/main perl-doc 5.8.0-17 [5609kB] |
| 368 |
Get:13 ftp://ftp.de.debian.org unstable/main perl 5.8.0-17 [3875kB] |
| 369 |
Get:14 ftp://ftp.de.debian.org unstable/main libdbi-perl 1.32-1 [460kB] |
| 370 |
Get:15 ftp://ftp.de.debian.org unstable/main libconvert-uulib-perl 0.212-1.1 [81.4kB] |
| 371 |
Get:16 ftp://ftp.de.debian.org unstable/main libdbd-mysql-perl 2.1020-2 [112kB] |
| 372 |
Get:17 ftp://ftp.de.debian.org unstable/main libunix-syslog-perl 0.100-1 [23.7kB] |
| 373 |
Get:18 ftp://ftp.de.debian.org unstable/main libssl0.9.7 0.9.7a-1 [1998kB] |
| 374 |
Get:19 ftp://ftp.de.debian.org unstable/main libnet-ssleay-perl 1.22-1 [165kB] |
| 375 |
Get:20 ftp://ftp.de.debian.org unstable/main libcompress-zlib-perl 1.16-1.1 [41.9kB] |
| 376 |
Get:21 ftp://ftp.de.debian.org unstable/main libgd-gd1-perl 1.41-4 [372kB] |
| 377 |
Get:22 ftp://ftp.de.debian.org unstable/main libgd-perl 1.41-4 [6028B] |
| 378 |
Get:23 ftp://ftp.de.debian.org unstable/main libcomerr1-kerberos4kth 1.2.1-7 [64.5kB] |
| 379 |
Get:24 ftp://ftp.de.debian.org unstable/main libasn1-6-heimdal 0.5.1-6 [62.9kB] |
| 380 |
Get:25 ftp://ftp.de.debian.org unstable/main libkrb-1-kerberos4kth 1.2.1-7 [103kB] |
| 381 |
Get:26 ftp://ftp.de.debian.org unstable/main libdb3 3.2.9-17 [243kB] |
| 382 |
Get:27 ftp://ftp.de.debian.org unstable/main libroken16-kerberos4kth 1.2.1-7 [93.0kB] |
| 383 |
Get:28 ftp://ftp.de.debian.org unstable/main libkrb5-17-heimdal 0.5.1-6 [113kB] |
| 384 |
Get:29 ftp://ftp.de.debian.org unstable/main libpq3 7.3.2r-2 [63.2kB] |
| 385 |
Get:30 ftp://ftp.de.debian.org unstable/main libperl5.8 5.8.0-17 [473kB] |
| 386 |
Get:31 ftp://ftp.de.debian.org unstable/main libpgperl 7.3.2r-2 [102kB] |
| 387 |
Get:32 ftp://ftp.de.debian.org unstable/main libhtml-parser-perl 3.26-0.1 [92.5kB] |
| 388 |
Get:33 ftp://ftp.de.debian.org unstable/main libmime-base64-perl 2.12-4.1 [18.6kB] |
| 389 |
Get:34 ftp://ftp.de.debian.org unstable/main libdigest-nilsimsa-perl 0.06-1 [13.7kB] |
| 390 |
Get:35 ftp://ftp.de.debian.org unstable/main libdigest-sha1-perl 2.01-0.1 [19.1kB] |
| 391 |
Get:36 ftp://ftp.de.debian.org unstable/main razor 2.200-2 [94.2kB] |
| 392 |
Get:37 ftp://ftp.de.debian.org unstable/main libapache-mod-perl 1.27-3 [435kB] |
| 393 |
Get:38 ftp://ftp.de.debian.org unstable/main perl-base 5.8.0-17 [713kB] |
| 394 |
Get:39 ftp://ftp.de.debian.org unstable/main apache 1.3.27-0.1 [358kB] |
| 395 |
Get:40 ftp://ftp.de.debian.org unstable/main apache-common 1.3.27-0.1 [816kB] |
| 396 |
Get:41 ftp://ftp.de.debian.org unstable/main libc-client2003debian 6:2003debian0.0302202017-1 [564kB] |
| 397 |
Get:42 ftp://ftp.de.debian.org unstable/main libcurl2 7.10.3-2 [213kB] |
| 398 |
Get:43 ftp://ftp.de.debian.org unstable/main libxml2 2.5.3-1 [547kB] |
| 399 |
Fetched 26.7MB in 18s (1420kB/s) |
| 400 |
|
| 401 |
+------------------------------¦ Configuring Libc-client2003debian +------------------------------+ |
| 402 |
¦ As per IESG recommendations, libc-client no longer supports plaintext passwords over ¦ |
| 403 |
¦ non-SSL/TLS connections by default. This affects uw-imapd, ipopd and any other programs that ¦ |
| 404 |
¦ use libc-client for mail access. However, this functionality can be re-enabled by a directive ¦ |
| 405 |
¦ in the semi-official /etc/c-client.cf configuration file. If you answer yes, the directive ¦ |
| 406 |
¦ will be added for you. Note POP2 will not work over an encrypted connection. ¦ |
| 407 |
¦ ¦ |
| 408 |
¦ Note: cramd-md5 passwords are treated as plaintext passwords! ¦ |
| 409 |
¦ ¦ |
| 410 |
¦ Should plaintext passwords be enabled? ¦ |
| 411 |
¦ ¦ |
| 412 |
¦ no ¦ |
| 413 |
¦ yes ¦ |
| 414 |
¦ ¦ |
| 415 |
¦ ¦ |
| 416 |
¦ <Ok> ¦ |
| 417 |
¦ ¦ |
| 418 |
+-------------------------------------------------------------------------------------------------+ |
| 419 |
|
| 420 |
(Reading database ... 30565 files and directories currently installed.) |
| 421 |
Removing libnss-db ... |
| 422 |
dpkg: libdigest-md5-perl: dependency problems, but removing anyway as you request: |
| 423 |
libwww-perl depends on libdigest-md5-perl. |
| 424 |
libnet-dns-perl depends on libdigest-md5-perl. |
| 425 |
libdigest-hmac-perl depends on libdigest-md5-perl. |
| 426 |
Removing libdigest-md5-perl ... |
| 427 |
|
| 428 |
(Reading database ... 30542 files and directories currently installed.) |
| 429 |
Preparing to replace libc6-dev 2.3.1-9 (using .../libc6-dev_2.3.1-14_i386.deb) ... |
| 430 |
Unpacking replacement libc6-dev ... |
| 431 |
Preparing to replace libc6 2.3.1-9 (using .../libc6_2.3.1-14_i386.deb) ... |
| 432 |
Unpacking replacement libc6 ... |
| 433 |
Setting up libc6 (2.3.1-14) ... |
| 434 |
Current default timezone: 'Europe/Berlin'. |
| 435 |
Local time is now: Sat Mar 8 00:38:08 CET 2003. |
| 436 |
Universal Time is now: Fri Mar 7 23:38:08 UTC 2003. |
| 437 |
Run 'tzconfig' if you wish to change it. |
| 438 |
|
| 439 |
(Reading database ... 30542 files and directories currently installed.) |
| 440 |
Preparing to replace libexpat1 1.95.5-1 (using .../libexpat1_1.95.6-3_i386.deb) ... |
| 441 |
Unpacking replacement libexpat1 ... |
| 442 |
Selecting previously deselected package gcc-3.2-base. |
| 443 |
Unpacking gcc-3.2-base (from .../gcc-3.2-base_1%3a3.2.3-0pre3_i386.deb) ... |
| 444 |
Preparing to replace libgcc1 1:3.0.4-7 (using .../libgcc1_1%3a3.2.3-0pre3_i386.deb) ... |
| 445 |
Unpacking replacement libgcc1 ... |
| 446 |
Selecting previously deselected package libstdc++5. |
| 447 |
Unpacking libstdc++5 (from .../libstdc++5_1%3a3.2.3-0pre3_i386.deb) ... |
| 448 |
Preparing to replace sablotron 0.96.1-2 (using .../sablotron_0.97-6_i386.deb) ... |
| 449 |
Unpacking replacement sablotron ... |
| 450 |
Preparing to replace php4-xslt 4:4.2.3-8 (using .../php4-xslt_4.2.3-9_SU-1_i386.deb) ... |
| 451 |
Unpacking replacement php4-xslt ... |
| 452 |
(Reading database ... 30556 files and directories currently installed.) |
| 453 |
Removing libsablot0 ... |
| 454 |
Selecting previously deselected package libsablot0c102. |
| 455 |
(Reading database ... 30550 files and directories currently installed.) |
| 456 |
Unpacking libsablot0c102 (from .../libsablot0c102_0.97-6_i386.deb) ... |
| 457 |
Preparing to replace php4-cgi 4:4.2.3-9 (using .../php4-cgi_4.2.3-9_SU-1_i386.deb) ... |
| 458 |
Unpacking replacement php4-cgi ... |
| 459 |
Preparing to replace libnet-perl 1:1.09.01-1 (using .../libnet-perl_1%3a1.12-1_all.deb) ... |
| 460 |
Unpacking replacement libnet-perl ... |
| 461 |
Preparing to replace perl-modules 5.6.1-8.2 (using .../perl-modules_5.8.0-17_all.deb) ... |
| 462 |
Unpacking replacement perl-modules ... |
| 463 |
dpkg: warning - unable to delete old file `/usr/share/perl/5.6.1/CGI': Directory not empty |
| 464 |
dpkg: warning - unable to delete old file `/usr/share/perl/5.6.1/CPAN': Directory not empty |
| 465 |
dpkg: warning - unable to delete old file `/usr/share/perl/5.6.1/Test': Directory not empty |
| 466 |
Selecting previously deselected package libdb4.0. |
| 467 |
Unpacking libdb4.0 (from .../libdb4.0_4.0.14-1_i386.deb) ... |
| 468 |
Preparing to replace perl-doc 5.6.1-8.2 (using .../perl-doc_5.8.0-17_all.deb) ... |
| 469 |
Leaving `diversion of /usr/bin/perldoc to /usr/bin/perldoc.stub by perl-doc' |
| 470 |
Unpacking replacement perl-doc ... |
| 471 |
Preparing to replace perl 5.6.1-8.2 (using .../perl_5.8.0-17_i386.deb) ... |
| 472 |
Unpacking replacement perl ... |
| 473 |
Preparing to replace libdbi-perl 1.21-2 (using .../libdbi-perl_1.32-1_i386.deb) ... |
| 474 |
Unpacking replacement libdbi-perl ... |
| 475 |
Preparing to replace libconvert-uulib-perl 0.201-2 (using .../libconvert-uulib-perl_0.212-1.1_i386.deb) ... |
| 476 |
Unpacking replacement libconvert-uulib-perl ... |
| 477 |
Preparing to replace libdbd-mysql-perl 1.2216-2 (using .../libdbd-mysql-perl_2.1020-2_i386.deb) ... |
| 478 |
Unpacking replacement libdbd-mysql-perl ... |
| 479 |
Preparing to replace libunix-syslog-perl 0.98-1 (using .../libunix-syslog-perl_0.100-1_i386.deb) ... |
| 480 |
Unpacking replacement libunix-syslog-perl ... |
| 481 |
Selecting previously deselected package libssl0.9.7. |
| 482 |
Unpacking libssl0.9.7 (from .../libssl0.9.7_0.9.7a-1_i386.deb) ... |
| 483 |
Preparing to replace libnet-ssleay-perl 1.08-1.1 (using .../libnet-ssleay-perl_1.22-1_i386.deb) ... |
| 484 |
Unpacking replacement libnet-ssleay-perl ... |
| 485 |
Preparing to replace libcompress-zlib-perl 1.16-1 (using .../libcompress-zlib-perl_1.16-1.1_i386.deb) ... |
| 486 |
Unpacking replacement libcompress-zlib-perl ... |
| 487 |
Selecting previously deselected package libgd-gd1-perl. |
| 488 |
Unpacking libgd-gd1-perl (from .../libgd-gd1-perl_1.41-4_i386.deb) ... |
| 489 |
dpkg: error processing /var/cache/apt/archives/libgd-gd1-perl_1.41-4_i386.deb (--unpack): |
| 490 |
trying to overwrite `/usr/lib/perl5/auto/GD/GD.so', which is also in package libgd-perl |
| 491 |
dpkg-deb: subprocess paste killed by signal (Broken pipe) |
| 492 |
Preparing to replace libgd-perl 1.38-5 (using .../libgd-perl_1.41-4_all.deb) ... |
| 493 |
Unpacking replacement libgd-perl ... |
| 494 |
Selecting previously deselected package libcomerr1-kerberos4kth. |
| 495 |
Unpacking libcomerr1-kerberos4kth (from .../libcomerr1-kerberos4kth_1.2.1-7_i386.deb) ... |
| 496 |
Selecting previously deselected package libasn1-6-heimdal. |
| 497 |
Unpacking libasn1-6-heimdal (from .../libasn1-6-heimdal_0.5.1-6_i386.deb) ... |
| 498 |
Errors were encountered while processing: |
| 499 |
/var/cache/apt/archives/libgd-gd1-perl_1.41-4_i386.deb |
| 500 |
E: Sub-process /usr/bin/dpkg returned an error code (1) |
| 501 |
|
| 502 |
|
| 503 |
#> dpkg --configure -a |
| 504 |
Errors were encountered while processing: |
| 505 |
libgd-perl |
| 506 |
libcompress-zlib-perl |
| 507 |
libnet-ssleay-perl |
| 508 |
libunix-syslog-perl |
| 509 |
perl |
| 510 |
libdbd-mysql-perl |
| 511 |
perl-modules |
| 512 |
perl-doc |
| 513 |
libconvert-uulib-perl |
| 514 |
libdbi-perl |
| 515 |
libnet-perl |
| 516 |
|
| 517 |
|
| 518 |
root@quepasa:/usr/lib# apt-get -f install |
| 519 |
Reading Package Lists... Done |
| 520 |
Building Dependency Tree... Done |
| 521 |
Correcting dependencies... Done |
| 522 |
The following extra packages will be installed: |
| 523 |
libapache-mod-perl libdb3 libdigest-nilsimsa-perl libdigest-sha1-perl libgd-gd1-perl |
| 524 |
libhtml-parser-perl libkrb-1-kerberos4kth libkrb5-17-heimdal libmime-base64-perl libperl5.8 |
| 525 |
libpgperl libpq3 libroken16-kerberos4kth perl-base razor |
| 526 |
The following packages will be REMOVED: |
| 527 |
libtime-hires-perl |
| 528 |
The following NEW packages will be installed: |
| 529 |
libdigest-nilsimsa-perl libgd-gd1-perl libkrb-1-kerberos4kth libkrb5-17-heimdal libperl5.8 libpq3 |
| 530 |
libroken16-kerberos4kth |
| 531 |
8 packages upgraded, 7 newly installed, 1 to remove and 263 not upgraded. |
| 532 |
11 packages not fully installed or removed. |
| 533 |
Need to get 0B/2948kB of archives. After unpacking 4333kB will be used. |
| 534 |
Do you want to continue? [Y/n] |
| 535 |
|
| 536 |
Selecting previously deselected package libkrb-1-kerberos4kth. |
| 537 |
(Reading database ... 31214 files and directories currently installed.) |
| 538 |
Unpacking libkrb-1-kerberos4kth (from .../libkrb-1-kerberos4kth_1.2.1-7_i386.deb) ... |
| 539 |
Preparing to replace libdb3 3.2.9-16 (using .../libdb3_3.2.9-17_i386.deb) ... |
| 540 |
Unpacking replacement libdb3 ... |
| 541 |
Selecting previously deselected package libroken16-kerberos4kth. |
| 542 |
Unpacking libroken16-kerberos4kth (from .../libroken16-kerberos4kth_1.2.1-7_i386.deb) ... |
| 543 |
Selecting previously deselected package libkrb5-17-heimdal. |
| 544 |
Unpacking libkrb5-17-heimdal (from .../libkrb5-17-heimdal_0.5.1-6_i386.deb) ... |
| 545 |
Selecting previously deselected package libpq3. |
| 546 |
Unpacking libpq3 (from .../libpq3_7.3.2r-2_i386.deb) ... |
| 547 |
cp: cannot stat `/etc/postgresql/pg_hba.conf': No such file or directory |
| 548 |
cp: cannot stat `/etc/postgresql/pg_hba.conf': No such file or directory |
| 549 |
cp: cannot stat `/etc/postgresql/postgresql.conf': No such file or directory |
| 550 |
Could not save old binaries |
| 551 |
Selecting previously deselected package libperl5.8. |
| 552 |
Unpacking libperl5.8 (from .../libperl5.8_5.8.0-17_i386.deb) ... |
| 553 |
Preparing to replace libpgperl 7.2.1-2woody2 (using .../libpgperl_7.3.2r-2_i386.deb) ... |
| 554 |
Unpacking replacement libpgperl ... |
| 555 |
Preparing to replace libmime-base64-perl 2.12-4 (using .../libmime-base64-perl_2.12-4.1_i386.deb) ... |
| 556 |
Unpacking replacement libmime-base64-perl ... |
| 557 |
Preparing to replace libapache-mod-perl 1.26-3.0woody1 (using .../libapache-mod-perl_1.27-3_i386.deb) ... |
| 558 |
Unpacking replacement libapache-mod-perl ... |
| 559 |
Preparing to replace libhtml-parser-perl 3.25-1 (using .../libhtml-parser-perl_3.26-0.1_i386.deb) ... |
| 560 |
Unpacking replacement libhtml-parser-perl ... |
| 561 |
Selecting previously deselected package libdigest-nilsimsa-perl. |
| 562 |
Unpacking libdigest-nilsimsa-perl (from .../libdigest-nilsimsa-perl_0.06-1_i386.deb) ... |
| 563 |
Preparing to replace libdigest-sha1-perl 2.00-1 (using .../libdigest-sha1-perl_2.01-0.1_i386.deb) ... |
| 564 |
Unpacking replacement libdigest-sha1-perl ... |
| 565 |
Preparing to replace razor 1.20-1 (using .../razor_2.200-2_i386.deb) ... |
| 566 |
Unpacking replacement razor ... |
| 567 |
dpkg: libtime-hires-perl: dependency problems, but removing anyway as you request: |
| 568 |
amavis-milter depends on libtime-hires-perl; however: |
| 569 |
Package libtime-hires-perl is to be removed. |
| 570 |
Package perl which provides libtime-hires-perl is not configured yet. |
| 571 |
(Reading database ... 31292 files and directories currently installed.) |
| 572 |
Removing libtime-hires-perl ... |
| 573 |
(Reading database ... 31279 files and directories currently installed.) |
| 574 |
Preparing to replace perl-base 5.6.1-8.2 (using .../perl-base_5.8.0-17_i386.deb) ... |
| 575 |
Unpacking replacement perl-base ... |
| 576 |
dpkg: warning - unable to delete old file `/usr/share/perl/5.6.1': Directory not empty |
| 577 |
Setting up perl-base (5.8.0-17) ... |
| 578 |
(Reading database ... 31267 files and directories currently installed.) |
| 579 |
Unpacking libgd-gd1-perl (from .../libgd-gd1-perl_1.41-4_i386.deb) ... |
| 580 |
Setting up libkrb-1-kerberos4kth (1.2.1-7) ... |
| 581 |
|
| 582 |
Setting up libdb3 (3.2.9-17) ... |
| 583 |
|
| 584 |
Setting up libroken16-kerberos4kth (1.2.1-7) ... |
| 585 |
|
| 586 |
Setting up libkrb5-17-heimdal (0.5.1-6) ... |
| 587 |
|
| 588 |
Setting up libpq3 (7.3.2r-2) ... |
| 589 |
|
| 590 |
Setting up libperl5.8 (5.8.0-17) ... |
| 591 |
|
| 592 |
Setting up perl-modules (5.8.0-17) ... |
| 593 |
Setting up perl (5.8.0-17) ... |
| 594 |
|
| 595 |
Setting up libpgperl (7.3.2r-2) ... |
| 596 |
Setting up libmime-base64-perl (2.12-4.1) ... |
| 597 |
Setting up libapache-mod-perl (1.27-3) ... |
| 598 |
|
| 599 |
Setting up libhtml-parser-perl (3.26-0.1) ... |
| 600 |
Setting up libdigest-nilsimsa-perl (0.06-1) ... |
| 601 |
Setting up libdigest-sha1-perl (2.01-0.1) ... |
| 602 |
Setting up razor (2.200-2) ... |
| 603 |
|
| 604 |
Setting up libcompress-zlib-perl (1.16-1.1) ... |
| 605 |
Setting up libconvert-uulib-perl (0.212-1.1) ... |
| 606 |
Setting up libdbi-perl (1.32-1) ... |
| 607 |
Setting up libdbd-mysql-perl (2.1020-2) ... |
| 608 |
Setting up libnet-perl (1.12-1) ... |
| 609 |
|
| 610 |
Setting up libnet-ssleay-perl (1.22-1) ... |
| 611 |
Setting up libunix-syslog-perl (0.100-1) ... |
| 612 |
Setting up perl-doc (5.8.0-17) ... |
| 613 |
|
| 614 |
Setting up libgd-gd1-perl (1.41-4) ... |
| 615 |
Setting up libgd-perl (1.41-4) ... |
| 616 |
root@quepasa:/usr/lib# |
| 617 |
|
| 618 |
|
| 619 |
|
| 620 |
--- Yakka still does not work... |
| 621 |
|
| 622 |
#> dpkg -i libxml-2.4.19 |
| 623 |
... didn't work out ... |
| 624 |
#> apt-get install libxml2 |
| 625 |
Preparing to replace libxml2 2.4.19-4 (using .../libxml2_2.5.3-1_i386.deb) ... |
| 626 |
Unpacking replacement libxml2 ... |
| 627 |
Setting up libxml2 (2.5.3-1) ... |
| 628 |
#> apt-get install libxslt1 |
| 629 |
Preparing to replace libxslt1 1.0.21-0.2 (using .../libxslt1_1.0.27-1_i386.deb) ... |
| 630 |
Unpacking replacement libxslt1 ... |
| 631 |
Setting up libxslt1 (1.0.27-1) ... |
| 632 |
#> apt-get install libxml1 |
| 633 |
Unpacking libxml1 (from .../libxml1_1%3a1.8.17-2_i386.deb) ... |
| 634 |
Setting up libxml1 (1.8.17-2) ... |
| 635 |
#> apt-get install sablotron |
| 636 |
Sorry, sablotron is already the newest version. |
| 637 |
0 packages upgraded, 0 newly installed, 0 to remove and 261 not upgraded. |
| 638 |
#> apt-get install expat |
| 639 |
Unpacking expat (from .../expat_1.95.6-3_i386.deb) ... |
| 640 |
Setting up expat (1.95.6-3) ... |
| 641 |
#> apt-get install php4-domxml |
| 642 |
Preparing to replace php4-domxml 4:4.2.3-8 (using .../php4-domxml_4.2.3-9_SU-1_i386.deb) ... |
| 643 |
Unpacking replacement php4-domxml ... |
| 644 |
Setting up php4-domxml (4.2.3-9_SU-1) ... |
| 645 |
#> apt-get install php4-mcrypt |
| 646 |
Preparing to replace php4-mcrypt 3:4.2.1-2 (using .../php4-mcrypt_3%3a4.2.3-1_i386.deb) ... |
| 647 |
Unpacking replacement php4-mcrypt ... |
| 648 |
Setting up php4-mcrypt (4.2.3-1) ... |
| 649 |
#> apt-get install libdb1-compat libexpat1 libmm12 |
| 650 |
Reading Package Lists... Done |
| 651 |
Building Dependency Tree... Done |
| 652 |
Sorry, libdb1-compat is already the newest version. |
| 653 |
Sorry, libexpat1 is already the newest version. |
| 654 |
Sorry, libmm12 is already the newest version. |
| 655 |
0 packages upgraded, 0 newly installed, 0 to remove and 259 not upgraded. |
| 656 |
#> apt-get install libpam0g |
| 657 |
Sorry, libpam0g is already the newest version. |
| 658 |
#> apt-get install libxslt-dev |
| 659 |
Reading Package Lists... Done |
| 660 |
Building Dependency Tree... Done |
| 661 |
Note, selecting libxslt1-dev instead of libxslt-dev |
| 662 |
The following extra packages will be installed: |
| 663 |
libglib2.0-0 libxml2-dev libxslt1-dev pkg-config zlib1g zlib1g-dev |
| 664 |
The following NEW packages will be installed: |
| 665 |
libglib2.0-0 libxml2-dev libxslt1-dev pkg-config zlib1g-dev |
| 666 |
1 packages upgraded, 5 newly installed, 0 to remove and 258 not upgraded. |
| 667 |
Need to get 2246kB of archives. After unpacking 8984kB will be used. |
| 668 |
Do you want to continue? [Y/n] |
| 669 |
Get:1 ftp://ftp.de.debian.org unstable/main zlib1g 1:1.1.4-11 [44.7kB] |
| 670 |
Get:2 ftp://ftp.de.debian.org unstable/main libglib2.0-0 2.2.1-2 [292kB] |
| 671 |
Get:3 ftp://ftp.de.debian.org unstable/main zlib1g-dev 1:1.1.4-11 [216kB] |
| 672 |
Get:4 ftp://ftp.de.debian.org unstable/main libxml2-dev 2.5.3-1 [1288kB] |
| 673 |
Get:5 ftp://ftp.de.debian.org unstable/main pkg-config 0.15.0-2 [38.3kB] |
| 674 |
Get:6 ftp://ftp.de.debian.org unstable/main libxslt1-dev 1.0.27-1 [367kB] |
| 675 |
Fetched 2246kB in 2s (941kB/s) |
| 676 |
(Reading database ... 31314 files and directories currently installed.) |
| 677 |
Preparing to replace zlib1g 1:1.1.4-1 (using .../zlib1g_1%3a1.1.4-11_i386.deb) ... |
| 678 |
Unpacking replacement zlib1g ... |
| 679 |
Selecting previously deselected package libglib2.0-0. |
| 680 |
Unpacking libglib2.0-0 (from .../libglib2.0-0_2.2.1-2_i386.deb) ... |
| 681 |
Selecting previously deselected package zlib1g-dev. |
| 682 |
Unpacking zlib1g-dev (from .../zlib1g-dev_1%3a1.1.4-11_i386.deb) ... |
| 683 |
Selecting previously deselected package libxml2-dev. |
| 684 |
Unpacking libxml2-dev (from .../libxml2-dev_2.5.3-1_i386.deb) ... |
| 685 |
Selecting previously deselected package pkg-config. |
| 686 |
Unpacking pkg-config (from .../pkg-config_0.15.0-2_i386.deb) ... |
| 687 |
Selecting previously deselected package libxslt1-dev. |
| 688 |
Unpacking libxslt1-dev (from .../libxslt1-dev_1.0.27-1_i386.deb) ... |
| 689 |
Setting up zlib1g (1.1.4-11) ... |
| 690 |
|
| 691 |
Setting up libglib2.0-0 (2.2.1-2) ... |
| 692 |
|
| 693 |
Setting up zlib1g-dev (1.1.4-11) ... |
| 694 |
Setting up libxml2-dev (2.5.3-1) ... |
| 695 |
|
| 696 |
Setting up pkg-config (0.15.0-2) ... |
| 697 |
Setting up libxslt1-dev (1.0.27-1) ... |
| 698 |
|
| 699 |
|
| 700 |
-------- still doesn't work..... |
| 701 |
|
| 702 |
#> apt-get install php4-dev |
| 703 |
Reading Package Lists... Done |
| 704 |
Building Dependency Tree... Done |
| 705 |
The following extra packages will be installed: |
| 706 |
autoconf autoconf2.13 automake1.4 autotools-dev libtool |
| 707 |
The following NEW packages will be installed: |
| 708 |
autoconf autoconf2.13 automake1.4 autotools-dev libtool php4-dev |
| 709 |
0 packages upgraded, 6 newly installed, 0 to remove and 258 not upgraded. |
| 710 |
Need to get 1745kB/2074kB of archives. After unpacking 6577kB will be used. |
| 711 |
Do you want to continue? [Y/n] |
| 712 |
Get:1 ftp://ftp.de.debian.org unstable/main autoconf 2.57-2 [777kB] |
| 713 |
Get:2 ftp://ftp.de.debian.org unstable/main autoconf2.13 2.13-47 [365kB] |
| 714 |
Get:3 ftp://ftp.de.debian.org unstable/main autotools-dev 20030110.1 [51.3kB] |
| 715 |
Get:4 ftp://ftp.de.debian.org unstable/main automake1.4 1:1.4-p6-6 [274kB] |
| 716 |
Get:5 ftp://ftp.de.debian.org unstable/main libtool 1.4.3-5 [279kB] |
| 717 |
Fetched 1745kB in 2s (654kB/s) |
| 718 |
Selecting previously deselected package autoconf. |
| 719 |
(Reading database ... 31629 files and directories currently installed.) |
| 720 |
Unpacking autoconf (from .../autoconf_2.57-2_all.deb) ... |
| 721 |
Selecting previously deselected package autoconf2.13. |
| 722 |
Unpacking autoconf2.13 (from .../autoconf2.13_2.13-47_all.deb) ... |
| 723 |
Adding `diversion of /usr/bin/autoconf to /usr/bin/autoconf2.50 by autoconf2.13' |
| 724 |
Adding `diversion of /usr/bin/autoheader to /usr/bin/autoheader2.50 by autoconf2.13' |
| 725 |
Adding `diversion of /usr/bin/autoreconf to /usr/bin/autoreconf2.50 by autoconf2.13' |
| 726 |
Selecting previously deselected package autotools-dev. |
| 727 |
Unpacking autotools-dev (from .../autotools-dev_20030110.1_all.deb) ... |
| 728 |
Selecting previously deselected package automake1.4. |
| 729 |
Unpacking automake1.4 (from .../automake1.4_1%3a1.4-p6-6_all.deb) ... |
| 730 |
Selecting previously deselected package libtool. |
| 731 |
Unpacking libtool (from .../libtool_1.4.3-5_i386.deb) ... |
| 732 |
Selecting previously deselected package php4-dev. |
| 733 |
Unpacking php4-dev (from .../php4-dev_4.2.3-9_SU-1_all.deb) ... |
| 734 |
Setting up autoconf (2.57-2) ... |
| 735 |
|
| 736 |
Setting up autoconf2.13 (2.13-47) ... |
| 737 |
|
| 738 |
Setting up autotools-dev (20030110.1) ... |
| 739 |
Setting up automake1.4 (1.4-p6-6) ... |
| 740 |
|
| 741 |
Setting up libtool (1.4.3-5) ... |
| 742 |
Configuring libtool... |
| 743 |
|
| 744 |
Setting up php4-dev (4.2.3-9_SU-1) ... |
| 745 |
|
| 746 |
|
| 747 |
|
| 748 |
--- still not working!!! |
| 749 |
|
| 750 |
#> apt-get install libbz2 |
| 751 |
Reading Package Lists... Done |
| 752 |
Building Dependency Tree... Done |
| 753 |
The following NEW packages will be installed: |
| 754 |
libbz2 |
| 755 |
0 packages upgraded, 1 newly installed, 0 to remove and 258 not upgraded. |
| 756 |
Need to get 29.4kB of archives. After unpacking 62.5kB will be used. |
| 757 |
Get:1 ftp://ftp.de.debian.org unstable/main libbz2 0.9.5d-4 [29.4kB] |
| 758 |
Fetched 29.4kB in 0s (39.2kB/s) |
| 759 |
Selecting previously deselected package libbz2. |
| 760 |
(Reading database ... 32069 files and directories currently installed.) |
| 761 |
Unpacking libbz2 (from .../libbz2_0.9.5d-4_i386.deb) ... |
| 762 |
Setting up libbz2 (0.9.5d-4) ... |
| 763 |
#> apt-get install libdb2 |
| 764 |
Preparing to replace libdb2 2:2.7.7.0-7 (using .../libdb2_2%3a2.7.7.0-8_i386.deb) ... |
| 765 |
Unpacking replacement libdb2 ... |
| 766 |
Setting up libdb2 (2.7.7.0-8) ... |
| 767 |
#> apt-get install libpcre3 |
| 768 |
Preparing to replace libpcre3 3.4-1.1 (using .../libpcre3_3.9-1_i386.deb) ... |
| 769 |
Unpacking replacement libpcre3 ... |
| 770 |
Setting up libpcre3 (3.9-1) ... |
| 771 |
#> apt-get install apache |
| 772 |
Reading Package Lists... Done |
| 773 |
Building Dependency Tree... Done |
| 774 |
The following extra packages will be installed: |
| 775 |
apache-common |
| 776 |
2 packages upgraded, 0 newly installed, 0 to remove and 254 not upgraded. |
| 777 |
Need to get 0B/1174kB of archives. After unpacking 4096B will be freed. |
| 778 |
Do you want to continue? [Y/n] |
| 779 |
(Reading database ... 32077 files and directories currently installed.) |
| 780 |
Preparing to replace apache 1.3.26-0woody3 (using .../apache_1.3.27-0.1_i386.deb) ... |
| 781 |
Unpacking replacement apache ... |
| 782 |
Preparing to replace apache-common 1.3.26-0woody3 (using .../apache-common_1.3.27-0.1_i386.deb) ... |
| 783 |
Unpacking replacement apache-common ... |
| 784 |
Setting up apache-common (1.3.27-0.1) ... |
| 785 |
|
| 786 |
Setting up apache (1.3.27-0.1) ... |
| 787 |
Apache has switched to using logrotate. However, some of your logs |
| 788 |
are stored outside the /var/log/apache directory, so you should |
| 789 |
edit /etc/logrotate.d/apache to have them automatically rotated. |
| 790 |
|
| 791 |
Reloading apache modulesNo process in pidfile `/var/run/apache.pid' found running; none killed. |
| 792 |
|
| 793 |
|
| 794 |
|
| 795 |
--- still not working! |
| 796 |
|
| 797 |
--- trying jonen's php4 compiled on slurp (2003-03-06) |
| 798 |
--- still not working! |
| 799 |
|
| 800 |
again trying 4.2.3-8.... |
| 801 |
|
| 802 |
#> apt-get install libxmltok1 |
| 803 |
The following NEW packages will be installed: |
| 804 |
libxmltok1 |
| 805 |
Unpacking libxmltok1 (from .../libxmltok1_1.1-8_i386.deb) ... |
| 806 |
Setting up libxmltok1 (1.1-8) ... |
| 807 |
|
| 808 |
#> apt-get install libsablot0 |
| 809 |
Reading Package Lists... Done |
| 810 |
Building Dependency Tree... Done |
| 811 |
The following packages will be REMOVED: |
| 812 |
libsablot0c102 php4-xslt sablotron |
| 813 |
The following NEW packages will be installed: |
| 814 |
libsablot0 |
| 815 |
0 packages upgraded, 1 newly installed, 3 to remove and 5 not upgraded. |
| 816 |
Need to get 287kB of archives. After unpacking 914kB will be freed. |
| 817 |
Do you want to continue? [Y/n] |
| 818 |
Get:1 ftp://ftp.de.debian.org stable/main libsablot0 0.90-1 [287kB] |
| 819 |
Fetched 287kB in 0s (377kB/s) |
| 820 |
(Reading database ... 32087 files and directories currently installed.) |
| 821 |
Removing sablotron ... |
| 822 |
Removing php4-xslt ... |
| 823 |
You are removing XSLT support for php4, but it is still |
| 824 |
enabled in your /etc/php4/apache/php.ini. |
| 825 |
|
| 826 |
You should remove this line: |
| 827 |
|
| 828 |
extension=xslt.so |
| 829 |
|
| 830 |
Do you want me to do it now [Y/n] ? |
| 831 |
Removing libsablot0c102 ... |
| 832 |
Selecting previously deselected package libsablot0. |
| 833 |
(Reading database ... 31934 files and directories currently installed.) |
| 834 |
Unpacking libsablot0 (from .../libsablot0_0.90-1_i386.deb) ... |
| 835 |
Setting up libsablot0 (0.90-1) ... |
| 836 |
|
| 837 |
|
| 838 |
---- still not working |
| 839 |
|
| 840 |
|
| 841 |
|
| 842 |
@topic unstable/main only |
| 843 |
|
| 844 |
--> unstable/main only |
| 845 |
|
| 846 |
#> dpkg -r php4-domxml |
| 847 |
|
| 848 |
#> apt-get install php4 |
| 849 |
Reading Package Lists... Done |
| 850 |
Building Dependency Tree... Done |
| 851 |
1 packages upgraded, 0 newly installed, 0 to remove and 254 not upgraded. |
| 852 |
Need to get 630kB of archives. After unpacking 98.3kB will be freed. |
| 853 |
Get:1 ftp://ftp.de.debian.org unstable/main php4 4:4.2.3-11 [630kB] |
| 854 |
Fetched 630kB in 0s (698kB/s) |
| 855 |
(Reading database ... 31937 files and directories currently installed.) |
| 856 |
Preparing to replace php4 4:4.2.3-8 (using .../php4_4%3a4.2.3-11_i386.deb) ... |
| 857 |
Unpacking replacement php4 ... |
| 858 |
Setting up php4 (4.2.3-11) ... |
| 859 |
|
| 860 |
#> apt-get install php4-domxml |
| 861 |
Reading Package Lists... Done |
| 862 |
Building Dependency Tree... Done |
| 863 |
The following NEW packages will be installed: |
| 864 |
php4-domxml |
| 865 |
0 packages upgraded, 1 newly installed, 0 to remove and 254 not upgraded. |
| 866 |
Need to get 23.6kB of archives. After unpacking 77.8kB will be used. |
| 867 |
Get:1 ftp://ftp.de.debian.org unstable/main php4-domxml 4:4.2.3-11 [23.6kB] |
| 868 |
Fetched 23.6kB in 0s (48.2kB/s) |
| 869 |
Selecting previously deselected package php4-domxml. |
| 870 |
(Reading database ... 31937 files and directories currently installed.) |
| 871 |
Unpacking php4-domxml (from .../php4-domxml_4%3a4.2.3-11_i386.deb) ... |
| 872 |
|
| 873 |
#> ldconfig |
| 874 |
|
| 875 |
#> /etc/init.d/apache reload |
| 876 |
|
| 877 |
--- still not working! |
| 878 |
|
| 879 |
#> apt-get install coreutils |
| 880 |
Reading Package Lists... Done |
| 881 |
Building Dependency Tree... Done |
| 882 |
1 packages upgraded, 0 newly installed, 0 to remove and 253 not upgraded. |
| 883 |
Need to get 2251kB of archives. After unpacking 479kB will be used. |
| 884 |
Get:1 ftp://ftp.de.debian.org unstable/main coreutils 4.5.9-1 [2251kB] |
| 885 |
Fetched 2251kB in 2s (781kB/s) |
| 886 |
(Reading database ... 31940 files and directories currently installed.) |
| 887 |
Preparing to replace coreutils 4.5.4-1 (using .../coreutils_4.5.9-1_i386.deb) ... |
| 888 |
Unpacking replacement coreutils ... |
| 889 |
Replacing files in old package debianutils ... |
| 890 |
Setting up coreutils (4.5.9-1) ... |
| 891 |
|
| 892 |
#> apt-get install libc6 |
| 893 |
Reading Package Lists... Done |
| 894 |
Building Dependency Tree... Done |
| 895 |
Sorry, libc6 is already the newest version. |
| 896 |
0 packages upgraded, 0 newly installed, 0 to remove and 253 not upgraded. |
| 897 |
|
| 898 |
#> apt-get install php4 php4-cgi php4-dev php4-curl php4-domxml php4-gd php4-imap php4-ldap php4-mcal php4-mhash php4-mysql php4-recode php4-xslt php4-mcrypt |
| 899 |
(#> apt-get install php4-odbc php4-snmp php4-sybase) |
| 900 |
|
| 901 |
#> apt-get install sablotron |
| 902 |
Reading Package Lists... Done |
| 903 |
Building Dependency Tree... Done |
| 904 |
The following NEW packages will be installed: |
| 905 |
sablotron |
| 906 |
0 packages upgraded, 1 newly installed, 0 to remove and 250 not upgraded. |
| 907 |
Need to get 0B/74.5kB of archives. After unpacking 1073kB will be used. |
| 908 |
Selecting previously deselected package sablotron. |
| 909 |
(Reading database ... 31966 files and directories currently installed.) |
| 910 |
Unpacking sablotron (from .../sablotron_0.97-6_i386.deb) ... |
| 911 |
Setting up sablotron (0.97-6) ... |
| 912 |
|
| 913 |
#> apt-get install librecode0 |
| 914 |
Reading Package Lists... Done |
| 915 |
Building Dependency Tree... Done |
| 916 |
1 packages upgraded, 0 newly installed, 0 to remove and 249 not upgraded. |
| 917 |
Need to get 685kB of archives. After unpacking 28.7kB will be used. |
| 918 |
Get:1 ftp://ftp.de.debian.org unstable/main librecode0 3.6-7 [685kB] |
| 919 |
Fetched 685kB in 3s (186kB/s) |
| 920 |
(Reading database ... 32174 files and directories currently installed.) |
| 921 |
Preparing to replace librecode0 3.6-6 (using .../librecode0_3.6-7_i386.deb) ... |
| 922 |
Unpacking replacement librecode0 ... |
| 923 |
Setting up librecode0 (3.6-7) ... |
| 924 |
|
| 925 |
|
| 926 |
|
| 927 |
@topic solution? |
| 928 |
|
| 929 |
use: |
| 930 |
x libexpat1_1.95.5-1_i386.deb |
| 931 |
x libxml2_2.4.19-4_i386.deb |
| 932 |
|
| 933 |
an "apache graceful" won't do when patching these libs, so issue (at best) ... |
| 934 |
#> ldconfig |
| 935 |
#> /etc/init.d/apache restart |
| 936 |
... after installing these libs: |
| 937 |
|
| 938 |
|
| 939 |
#> dpkg -i libexpat1_1.95.5-1_i386.deb |
| 940 |
|
| 941 |
xml |
| 942 |
XML Support active |
| 943 |
XML Namespace Support active |
| 944 |
EXPAT Version expat_1.95.6 |
| 945 |
|
| 946 |
xml |
| 947 |
XML Support active |
| 948 |
XML Namespace Support active |
| 949 |
EXPAT Version expat_1.95.5 <------- |
| 950 |
|
| 951 |
|
| 952 |
|
| 953 |
#> dpkg -i libxml2_2.4.19-4_i386.deb |
| 954 |
|
| 955 |
domxml |
| 956 |
DOM/XML enabled |
| 957 |
libxml Version 2.5.3 |
| 958 |
HTML Support enabled |
| 959 |
XPath Support enabled |
| 960 |
XPointer Support enabled |
| 961 |
|
| 962 |
domxml |
| 963 |
DOM/XML enabled |
| 964 |
libxml Version 2.4.19 <------ |
| 965 |
HTML Support enabled |
| 966 |
XPath Support enabled |
| 967 |
XPointer Support enabled |
| 968 |
|
Parent Directory
| 
Revision Log
