| 1 |
@sequence meta |
| 2 |
@title joko's sample notes - 2003-03 - ResourceIntegration |
| 3 |
@subtitle ResourceIntegration II |
| 4 |
@topic joko's Tasks |
| 5 |
@author joko@netfrag.org |
| 6 |
@document-mime-type text/plain |
| 7 |
@document-mime-type text/english text/german |
| 8 |
@document-mime-type text/vnd.twingle |
| 9 |
|
| 10 |
@sequence meta |
| 11 |
@document-history |
| 12 |
@cvs-info |
| 13 |
$Id: joko_2003-03.twingle,v 1.38 2003/03/11 05:26:23 joko Exp $ |
| 14 |
$Log: joko_2003-03.twingle,v $ |
| 15 |
Revision 1.38 2003/03/11 05:26:23 joko |
| 16 |
+ AUTOCOMMIT: updated/added content |
| 17 |
|
| 18 |
Revision 1.37 2003/03/11 04:25:58 joko |
| 19 |
+ AUTOCOMMIT: updated/added content |
| 20 |
|
| 21 |
Revision 1.36 2003/03/11 02:55:54 joko |
| 22 |
+ AUTOCOMMIT: updated/added content |
| 23 |
|
| 24 |
Revision 1.35 2003/03/11 01:55:57 joko |
| 25 |
+ AUTOCOMMIT: updated/added content |
| 26 |
|
| 27 |
Revision 1.34 2003/03/10 23:55:51 joko |
| 28 |
+ AUTOCOMMIT: updated/added content |
| 29 |
|
| 30 |
Revision 1.33 2003/03/10 18:55:55 joko |
| 31 |
+ AUTOCOMMIT: updated/added content |
| 32 |
|
| 33 |
Revision 1.32 2003/03/10 17:56:05 joko |
| 34 |
+ AUTOCOMMIT: updated/added content |
| 35 |
|
| 36 |
Revision 1.31 2003/03/10 16:25:55 joko |
| 37 |
+ AUTOCOMMIT: updated/added content |
| 38 |
|
| 39 |
Revision 1.30 2003/03/10 03:56:32 joko |
| 40 |
+ AUTOCOMMIT: updated/added content |
| 41 |
|
| 42 |
Revision 1.29 2003/03/10 03:27:24 joko |
| 43 |
+ AUTOCOMMIT: updated/added content |
| 44 |
|
| 45 |
Revision 1.27 2003/03/09 19:56:04 joko |
| 46 |
+ AUTOCOMMIT: updated/added content |
| 47 |
|
| 48 |
Revision 1.25 2003/03/08 23:26:21 joko |
| 49 |
+ AUTOCOMMIT: updated/added content |
| 50 |
|
| 51 |
Revision 1.24 2003/03/08 22:56:30 joko |
| 52 |
+ AUTOCOMMIT: updated/added content |
| 53 |
|
| 54 |
Revision 1.23 2003/03/08 18:26:20 joko |
| 55 |
+ AUTOCOMMIT: updated/added content |
| 56 |
|
| 57 |
Revision 1.21 2003/03/08 14:26:13 joko |
| 58 |
+ AUTOCOMMIT: updated/added content |
| 59 |
|
| 60 |
Revision 1.20 2003/03/08 13:56:42 joko |
| 61 |
+ AUTOCOMMIT: updated/added content |
| 62 |
|
| 63 |
Revision 1.19 2003/03/08 12:56:24 joko |
| 64 |
+ AUTOCOMMIT: updated/added content |
| 65 |
|
| 66 |
Revision 1.18 2003/03/08 12:27:20 joko |
| 67 |
+ AUTOCOMMIT: updated/added content |
| 68 |
|
| 69 |
Revision 1.17 2003/03/08 11:27:00 joko |
| 70 |
+ AUTOCOMMIT: updated/added content |
| 71 |
|
| 72 |
Revision 1.16 2003/03/08 08:56:05 joko |
| 73 |
+ AUTOCOMMIT: updated/added content |
| 74 |
|
| 75 |
Revision 1.15 2003/03/08 07:55:59 joko |
| 76 |
+ AUTOCOMMIT: updated/added content |
| 77 |
|
| 78 |
Revision 1.14 2003/03/08 07:25:57 joko |
| 79 |
+ AUTOCOMMIT: updated/added content |
| 80 |
|
| 81 |
Revision 1.13 2003/03/08 05:56:38 joko |
| 82 |
+ AUTOCOMMIT: updated/added content |
| 83 |
|
| 84 |
Revision 1.12 2003/03/08 05:25:54 joko |
| 85 |
+ AUTOCOMMIT: updated/added content |
| 86 |
|
| 87 |
Revision 1.11 2003/03/08 04:55:46 joko |
| 88 |
+ AUTOCOMMIT: updated/added content |
| 89 |
|
| 90 |
Revision 1.10 2003/03/07 22:26:20 joko |
| 91 |
+ AUTOCOMMIT: updated/added content |
| 92 |
|
| 93 |
Revision 1.9 2003/03/07 20:56:02 joko |
| 94 |
+ AUTOCOMMIT: updated/added content |
| 95 |
|
| 96 |
Revision 1.8 2003/03/07 18:26:17 joko |
| 97 |
+ AUTOCOMMIT: updated/added content |
| 98 |
|
| 99 |
Revision 1.7 2003/03/07 17:56:46 joko |
| 100 |
+ AUTOCOMMIT: updated/added content |
| 101 |
|
| 102 |
Revision 1.6 2003/03/07 16:56:42 joko |
| 103 |
+ AUTOCOMMIT: updated/added content |
| 104 |
|
| 105 |
Revision 1.5 2003/03/07 15:57:11 joko |
| 106 |
+ AUTOCOMMIT: updated/added content |
| 107 |
|
| 108 |
Revision 1.4 2003/03/07 04:25:54 joko |
| 109 |
+ AUTOCOMMIT: updated/added content |
| 110 |
|
| 111 |
Revision 1.3 2003/03/07 03:56:59 joko |
| 112 |
+ AUTOCOMMIT: updated/added content |
| 113 |
|
| 114 |
Revision 1.2 2003/03/07 00:56:08 joko |
| 115 |
+ AUTOCOMMIT: updated/added content |
| 116 |
|
| 117 |
Revision 1.1 2003/03/06 22:34:20 joko |
| 118 |
+ initial commit |
| 119 |
|
| 120 |
|
| 121 |
@sequence meta |
| 122 |
@x-transport |
| 123 |
@x-transport-from grasshopper.netfrag.org |
| 124 |
@x-transport-to quepasa.netfrag.org |
| 125 |
@x-transporter Microsoft Windows |
| 126 |
@x-transporter WinCVS [WinCVS 1.3.8.1 Beta 8 (Build 1)] |
| 127 |
@x-transporter-protocol cvs client-server protocol |
| 128 |
@x-transporter OpenSSH client on grasshopper [OpenSSH_3.4p1, SSH protocols 1.5/2.0, OpenSSL 0x0090607f] |
| 129 |
@x-transporter-protocol ssh [OpenSSH Version 2] |
| 130 |
@x-transporter OpenSSH daemon on quepasa [OpenSSH_3.4p1 Debian 1:3.4p1-1, SSH protocols 1.5/2.0, OpenSSL 0x0090603f] |
| 131 |
@x-transporter cvs [Concurrent Versions System (CVS) 1.11.1p1 (client/server)] |
| 132 |
@x-transporter-protocol cvs client-server protocol |
| 133 |
@x-transporter Linux running on quepasa.netfrag.org [Linux version 2.4.18-29um (root@linux) (gcc version 2.95.3 20010315 (SuSE)) #1 Sun May 26 17:01:48 CEST 2002] |
| 134 |
@x-transporter-protocol ext3 |
| 135 |
@x-transporter Linux running on h1.service.netfrag.org [Linux version 2.4.10-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Tue Sep 25 12:33:54 GMT 2001] |
| 136 |
@x-transporter-protocol ext3 |
| 137 |
#@x-converter twingle [Twingle 0.01 - http://search.netfrag.org/twingle] |
| 138 |
|
| 139 |
@sequence script |
| 140 |
@set o=@todo |
| 141 |
|
| 142 |
|
| 143 |
|
| 144 |
@sequence block |
| 145 |
@injected |
| 146 |
@date 2003-03-06 20:29 |
| 147 |
@file [unknown] |
| 148 |
@x-editor Notepad [Microsoft Editor Version 5.0 (Build 2195: Service Pack 3) |
| 149 |
@x-transporter Microsoft COM |
| 150 |
@x-transporter-protocol copy & paste negotiation |
| 151 |
@x-editor UltraEdit [UltraEdit(r)-32 Professional Text/HEX Editor Version 8.10b] |
| 152 |
|
| 153 |
|
| 154 |
o use arial|verdana for netscape|mozilla rendering on netfrag.org |
| 155 |
|
| 156 |
- We get spam! |
| 157 |
After feeling relatively safe through amavis based email filtering, it happened again. |
| 158 |
jonen recieved some spam again. |
| 159 |
|
| 160 |
Why? |
| 161 |
I believe the addresses get collected by foreign agents crawling |
| 162 |
the growing content on netfrag.org. |
| 163 |
|
| 164 |
What todo now? |
| 165 |
Mungle email addresses published on netfrag.org through some lisp- |
| 166 |
or scheme-based address-mungler found recently. |
| 167 |
They stay rfc-compliant, but are (hopefully) unreachable for common |
| 168 |
regex parsers. |
| 169 |
Send info to ->jonen. |
| 170 |
@tbd Automate this task! Do you wanna rewrite each address by hand...??? |
| 171 |
|
| 172 |
o personal requirement: |
| 173 |
o daily: review contributions made by other users |
| 174 |
o requirement to solve this: have everything as rss/rdf and filter the xml by author |
| 175 |
|
| 176 |
o rss.netfrag.org (register) |
| 177 |
o establish some web-based rss-browser embedding content from |
| 178 |
o RssGenerators for local content ... |
| 179 |
o news//rss (for news.netfrag.org) |
| 180 |
o cvs//rss (for cvs.netfrag.org) |
| 181 |
o ... and RssGateways to other ones, possibly at remote locations |
| 182 |
o phpWiki//rss (for www.netfrag.org) |
| 183 |
o TWiki//rss (for future www.netfrag.org) |
| 184 |
|
| 185 |
o post to perl-development (nfo.dev.perl): |
| 186 |
o how to abstract the view/editing of xml-files via an api? |
| 187 |
o fetch: all|single-node |
| 188 |
o edit: single-node flattened into an object |
| 189 |
o browser layer: locator registry (pointing to a) an orm-db and b) to a file-set of xml-files (our control-db)) |
| 190 |
o item layer: view/edit nodes of an xml-file a) in a tree-editor (look at HTML_Tree_XYZ itself!!!) and |
| 191 |
b) split into our "flat-components" Item and List (object-like) |
| 192 |
|
| 193 |
how b)? solve in backend! |
| 194 |
o backend |
| 195 |
o change values containing references to their interpolated placeholders to convert a node to an item |
| 196 |
->getNode(...) |
| 197 |
example: getNode('root') |
| 198 |
o place querying api via XPath parallel to that -> also returns a single node or multiples (a node-set) |
| 199 |
->getNodeSet(...) |
| 200 |
example: getNodeSet('xpath-query|named-filter') |
| 201 |
o establish backend querying api for xml-documents on top of that! |
| 202 |
->sendQuery(...) should dispatch to one of ->getNode or ->getNodeSet |
| 203 |
o frontend |
| 204 |
o browse relations (parent-, child-node) using the ValueInterpolator and the ItemComponent |
| 205 |
o edit Attributes and Content of Nodes with the ItemComponent showing *two* areas (this is the "FlatteningOfNodes"): |
| 206 |
o -> attributes |
| 207 |
o -> content |
| 208 |
That's the way various XML-EasyTree-Xyz implementations use to work. |
| 209 |
@link http://www.cpan.org/ |
| 210 |
o frontend issues these generic rpc-commands to the backend (encapsulated somewhere) |
| 211 |
o ->sendQuery(array(remote=1, rpc=1, blah=1, $query )) - |
| 212 |
which gets dispatched by switching some stuff from "$query" to these methods under the hood (in fact, *implemented at backend side*) |
| 213 |
o ->getNodeSet('xpath-query|named-filter') |
| 214 |
example: |
| 215 |
$xml_filter_query = array( 'return' => 'object|object-set', [filter => 'xpath-query|named-filter'] ); |
| 216 |
(speak: Item or List) |
| 217 |
sendQuery(array(remote=1, rpc=1, blah=1, $xml_filter_query , xml=1??? )) - |
| 218 |
|
| 219 |
--> what is 'remote' and/or 'rpc' about??? |
| 220 |
if i remember that right - 'remote' means 'orm' (the datasource-type) and 'rpc' means 'rpc' (the transport-type) |
| 221 |
|
| 222 |
o new twingle-symbol-topology using ... |
| 223 |
<code> |
| 224 |
o ... @-tags (stolen from JavaDoc via phpDocumentor) |
| 225 |
o @-tags only refer to scopes they live in |
| 226 |
o make the basic work: @todo, @link, @see, etc. (but enhanced - of course - since perl doesn't limit you in any way....!!!) |
| 227 |
o add some more: @sequence, @is-a, @title |
| 228 |
o @see |
| 229 |
o @embed this-and-that from these .twingle files: |
| 230 |
o @link DummyNamespaces in PHP - final proposal.twingle |
| 231 |
o @link Re - Namespaces in PHP.twingle |
| 232 |
</code> |
| 233 |
|
| 234 |
o project-metadata: / nfo topics |
| 235 |
<code> |
| 236 |
@is-a rfc |
| 237 |
@todo tbd |
| 238 |
x @topic source(cvs) |
| 239 |
x @topic doc(api) |
| 240 |
o @topic source(raw) (via symlinks: expand directories first, symlink files afterwards!) |
| 241 |
o @topic doc(tutorial) |
| 242 |
o @topic doc(examples) |
| 243 |
o @topic doc(howto) |
| 244 |
o introduce: @subtopic: |
| 245 |
@topic source |
| 246 |
@subtopic raw|cvs |
| 247 |
@topic doc |
| 248 |
@subtopic api|tutorial|examples|howto |
| 249 |
</code> |
| 250 |
|
| 251 |
o register: api.netfrag.org |
| 252 |
|
| 253 |
o arcor!!! |
| 254 |
|
| 255 |
o working alpha version of "Ts" on new server niu!!! |
| 256 |
|
| 257 |
o .phpdocrc: split main code to module, integrate index-generation of predefined (registered) modules |
| 258 |
|
| 259 |
o RssNewsletter: |
| 260 |
o schedule |
| 261 |
o hourly, daily, weekly, monthly, on-incoming |
| 262 |
o choose topic |
| 263 |
o all topics (cvs, news, api, docs, www) |
| 264 |
o choose destination |
| 265 |
o filtered-rss made available at specified url as xml or xhtml |
| 266 |
o via email |
| 267 |
o archived in archive-type (zip|tar) with format (html|) |
| 268 |
made available at specified url |
| 269 |
|
| 270 |
o look at FreeBSD's "doscmd"!!! |
| 271 |
|
| 272 |
o mechanism to refactor old smtp-mail-messages into new nntp-news-posts |
| 273 |
all our tools fail! *forwarding* the message seems to break mime (for e.g. the mozilla-viewer and probably others) |
| 274 |
o possible solution: strip "--- forwarded by ---" - header before actually posting |
| 275 |
maybe identifiable by subject: [Fwd: ] |
| 276 |
|
| 277 |
o enhance Twingle: |
| 278 |
o twingle2message: |
| 279 |
o twingle2mail: twingle2rfc822, twingle2mime |
| 280 |
o twingle2news: twingle2rfc |
| 281 |
|
| 282 |
o gather version info from installed components: |
| 283 |
o CPAN |
| 284 |
o PEAR |
| 285 |
x GNU: <program> --version (e.g.: cvs --version) |
| 286 |
x OpenSSH: ssh -V |
| 287 |
x Linux: cat /proc/version |
| 288 |
o our Perl-/PHP- component system |
| 289 |
|
| 290 |
|
| 291 |
|
| 292 |
@sequence block |
| 293 |
@written |
| 294 |
@date 2003-03-06 |
| 295 |
@x-editor UltraEdit [UltraEdit(r)-32 Professional Text/HEX Editor Version 8.10b] |
| 296 |
|
| 297 |
o what are the MIME-types of XML-payloads sent between (e.g.) RPCXML-hosts??? |
| 298 |
text/xml??? |
| 299 |
|
| 300 |
look at /etc/mime.types!!! |
| 301 |
e.g.: (stripped from there) - looking interesting: |
| 302 |
|
| 303 |
text/* |
| 304 |
text/x-java |
| 305 |
text/uri-list |
| 306 |
text/rfc822-headers |
| 307 |
text/directory |
| 308 |
text/vnd.IPTC.NewsML |
| 309 |
text/vnd.IPTC.NITF |
| 310 |
text/vnd.motorola.reflex |
| 311 |
text/vnd.DMClientScript |
| 312 |
text/richtext |
| 313 |
text/rtf |
| 314 |
text/plain |
| 315 |
text/comma-seperated-values |
| 316 |
text/css |
| 317 |
text/enriched |
| 318 |
|
| 319 |
--> vnd=vendor??? |
| 320 |
|
| 321 |
@sequence references |
| 322 |
@title The text/enriched MIME Content-type |
| 323 |
@link http://www.cis.ohio-state.edu/cgi-bin/rfc/rfc1896.html |
| 324 |
@title Mechanisms for Specifying and Describing the Format of Internet Message Bodies |
| 325 |
@link http://www.cis.ohio-state.edu/cgi-bin/rfc/rfc1521.html |
| 326 |
@title The text/enriched MIME Content-type |
| 327 |
@link http://www.cis.ohio-state.edu/cgi-bin/rfc/rfc1523.html |
| 328 |
@title Mechanisms for Specifying and Describing the Format of Internet Message Bodies |
| 329 |
@link http://www.cis.ohio-state.edu/cgi-bin/rfc/rfc1341.html |
| 330 |
@title The text/enriched MIME Content-type |
| 331 |
@link http://www.cis.ohio-state.edu/cgi-bin/rfc/rfc1563.html |
| 332 |
|
| 333 |
message/delivery-status |
| 334 |
message/disposition-notification |
| 335 |
message/external-body |
| 336 |
message/http |
| 337 |
message/s-http |
| 338 |
message/news |
| 339 |
message/partial |
| 340 |
message/rfc822 |
| 341 |
|
| 342 |
inode/chardevice |
| 343 |
inode/blockdevice |
| 344 |
inode/directory-locked |
| 345 |
inode/directory |
| 346 |
inode/fifo |
| 347 |
inode/socket |
| 348 |
|
| 349 |
multipart/* |
| 350 |
|
| 351 |
o refactor some twingle tags using ETF: |
| 352 |
@link http://citeseer.nj.nec.com/borenstein94textenriched.html |
| 353 |
--- snip --- |
| 354 |
@misc{ borenstein-textenriched, |
| 355 |
author = "N. Borenstein", |
| 356 |
title = "The text/enriched MIME Content-type", |
| 357 |
url = "citeseer.nj.nec.com/borenstein94textenriched.html" } |
| 358 |
--- snip --- |
| 359 |
|
| 360 |
o re-enable yakka! |
| 361 |
@link http://netfrag.org/~bareface/yakka/ |
| 362 |
|
| 363 |
o search.netfrag.org |
| 364 |
o enable mnoGoSearch to index http://www.netfrag.org/docs/code/api/ |
| 365 |
|
| 366 |
o post xml-via-rpc-querying proposal from above to nfo.dev.perl and cc to jonen! |
| 367 |
|
| 368 |
o enhancement for Twingle AutoLink LinkInterpolation: |
| 369 |
o don't resolve namespace identifiers (e.g. 'Data::Storage') against |
| 370 |
global search.netfrag.org/Search::This::Namespace |
| 371 |
o query namespaced links against an organization-wide (custom) NamespaceRegistry before!!! |
| 372 |
o use mysql/Tangram? |
| 373 |
o use xml? |
| 374 |
o just fallback to "GlobalSerchMode" if nothing was found in the step before! |
| 375 |
o Data::Storage will directly be resolved to this url or tag afterwards: |
| 376 |
@link http://www.netfrag.org/docs/topics/perl-libs/Data-Storage.html |
| 377 |
and not to |
| 378 |
@link http://www.netfrag.org/search/?q=Data::Storage&o=1&ul=/ |
| 379 |
like it was before! |
| 380 |
|
| 381 |
o mimic the functionality of TLTP (The LDAP Trigger Process) by using Data::Rap. |
| 382 |
|
| 383 |
o applications to be solved using LDAP |
| 384 |
o organization-wide addressbook |
| 385 |
o global / per-app software component registry |
| 386 |
o organization-wide item library -> inventory |
| 387 |
|
| 388 |
dot http://www.nc.ihost.com/ -> IBM |
| 389 |
|
| 390 |
@topic EasyAuthoring |
| 391 |
@see sdf |
| 392 |
@see text/enriched |
| 393 |
@see ETF |
| 394 |
@see WPP |
| 395 |
@link http://the.sunnyspot.org/wpp/index.html |
| 396 |
|
| 397 |
@company Watchfire |
| 398 |
@topic centrally located site integrity management software |
| 399 |
@link http://www.watchfire.com/ |
| 400 |
|
| 401 |
o look at brian finley's "Storage" article series at http://hpc.devchannel.org/ !!! |
| 402 |
|
| 403 |
- f-prot error on quepasa.netfrag.org: |
| 404 |
root@quepasa:~# tail -f /var/log/mail.log |
| 405 |
--- snip --- |
| 406 |
Mar 7 18:23:30 quepasa amavis[20705]: Virus scanner failure: /usr/local/f-prot/f-prot (error code: 1) |
| 407 |
Mar 7 18:23:30 quepasa amavis[20705]: virus_scan FAILED, retry: All virus scanners failed! at /usr/sbin/amavisd line 933, <GEN9> line 4712. |
| 408 |
Mar 7 18:23:30 quepasa amavis[20705]: mail processing failed, RETRY/TEMPFAIL |
| 409 |
Mar 7 18:23:30 quepasa sm-mta[20758]: h27HLveE020758: Milter: data, reject=451 4.7.1 Please try again later |
| 410 |
--- snip --- |
| 411 |
root@quepasa:~# /usr/local/f-prot/f-prot |
| 412 |
Error: SIGN.DEF is damaged or incompatible with this version of F-PROT. |
| 413 |
root@quepasa:~# /usr/local/f-prot/check-updates.sh |
| 414 |
root@quepasa:~# /usr/local/f-prot/f-prot |
| 415 |
|
| 416 |
|
| 417 |
|
| 418 |
@sequence block |
| 419 |
@injected |
| 420 |
@date 2003-03-07 19:01 |
| 421 |
@file [unknown] |
| 422 |
@x-editor Notepad [Microsoft Editor Version 5.0 (Build 2195: Service Pack 3) |
| 423 |
@x-transporter Microsoft COM |
| 424 |
@x-transporter-protocol copy & paste negotiation |
| 425 |
@x-editor UltraEdit [UltraEdit(r)-32 Professional Text/HEX Editor Version 8.10b] |
| 426 |
|
| 427 |
@set ->=@see |
| 428 |
|
| 429 |
|
| 430 |
o .phpdocrc: Tie::IxHash |
| 431 |
|
| 432 |
- writing a browser is a complex task |
| 433 |
-> Internet Explorer |
| 434 |
-> KDE xyz |
| 435 |
-> Mozilla |
| 436 |
|
| 437 |
- writing a mailer is a complex task |
| 438 |
-> Microsoft Outlook and (-Express) |
| 439 |
-> KDE (KMail, Kontact, Kolab) |
| 440 |
-> Evolution |
| 441 |
-> Mahogany |
| 442 |
|
| 443 |
|
| 444 |
|
| 445 |
@sequence block |
| 446 |
@written |
| 447 |
@date 2003-03-07 |
| 448 |
|
| 449 |
- janosch: pdf-gateway!? |
| 450 |
|
| 451 |
o setup ->colorize on quepasa.netfrag.org |
| 452 |
|
| 453 |
o refactor DesignPattern::MVC |
| 454 |
o new: @uses instances of classes inherited from the base ones |
| 455 |
DesignPattern::MVC::Model and DesignPattern::MVC::View, where |
| 456 |
- DesignPattern::MVC::Model is-a DesignPattern::Observer::Subject |
| 457 |
- DesignPattern::MVC::View is-a DesignPattern::Observer |
| 458 |
o new: refactor the rules-subsystem to be a ChangeManager |
| 459 |
between Subject and Observer sits a ChangeManager acting as mediator (is-a DesignPattern::Mediator) |
| 460 |
@see http://selab.korea.ac.kr/selab/courses/GoF-patterns/observer.htm |
| 461 |
|
| 462 |
o Twingle! |
| 463 |
o twingle -> dispatchmail (Twingle::Mail) |
| 464 |
o twingle -> twingledoc (Twingle::Doc) |
| 465 |
|
| 466 |
o refactor to "twingled/": |
| 467 |
o http://netfrag.org/~joko/computing/overview/topics/topics/ |
| 468 |
o http://netfrag.org/~joko/computing/overview/topics/SampleTasks/ |
| 469 |
o update http://netfrag.org/~joko/computing/overview/topics/topics.html |
| 470 |
|
| 471 |
x re-enable Yakka |
| 472 |
|
| 473 |
o setup phpDocumentor from cvs |
| 474 |
|
| 475 |
o "subscribe" a Folder (using rss/rdf!) |
| 476 |
|
| 477 |
o Arial (or similar font w/o serifs) for Mozilla! |
| 478 |
|
| 479 |
o edit preferences: Font (family, size) |
| 480 |
|
| 481 |
o debian-upgrade -> perl-upgrade => missing CPAN packages => |
| 482 |
o check in intervals: |
| 483 |
o /data/opt/dispatchmail/bin/dispatchmail |
| 484 |
--- snip --- [/var/log/mail.log] |
| 485 |
Mar 8 07:15:51 quepasa sm-mta[30731]: h286FmeE030726: to=|"/data/opt/dispatchmail/bin/dispatchmail --base=/home/joko/virtual/joko_mail", ctladdr=<joko_mail@quepasa.netfrag.org> (1000/100), delay=00:00:03, xdelay=00:00:01, mailer=prog, pri=30962, dsn=5.3.0, stat=unknown mailer error 2 |
| 486 |
Mar 8 07:15:51 quepasa sm-mta[30731]: h286FmeE030726: h286FpeD030731: DSN: unknown mailer error 2 |
| 487 |
Mar 8 07:15:52 quepasa sm-mta[30731]: h286FpeD030731: to=|"/data/opt/dispatchmail/bin/dispatchmail --base=/home/joko/virtual/joko_mail", ctladdr=<joko_mail@quepasa.netfrag.org> (1000/100), delay=00:00:01, xdelay=00:00:01, mailer=prog, pri=31986, dsn=5.3.0, stat=unknown mailer error 2 |
| 488 |
Mar 8 07:15:52 quepasa sm-mta[30731]: h286FpeD030731: h286FpeE030731: return to sender: unknown mailer error 2 |
| 489 |
Mar 8 07:15:53 quepasa sm-mta[30731]: h286FpeE030731: to=|"/data/opt/dispatchmail/bin/dispatchmail --base=/home/joko/virtual/joko_mail", ctladdr=joko_mail (1000/100), delay=00:00:01, xdelay=00:00:01, mailer=prog, pri=33010, dsn=5.3.0, stat=unknown mailer error 2 |
| 490 |
Mar 8 07:15:53 quepasa sm-mta[30731]: h286FpeD030731: Saved message in /var/lib/sendmail/dead.letter |
| 491 |
--- snip --- |
| 492 |
Can't locate Hash/Merge.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.0 /usr/local/share/perl/5.8.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.0 /usr/share/perl/5.8.0 /usr/local/lib/site_perl .) at ./dispatchmail line 34. |
| 493 |
BEGIN failed--compilation aborted at ./dispatchmail line 34. |
| 494 |
x perl -MCPAN -e "install Hash::Merge" |
| 495 |
dependencies resolved automagically: ->Clone |
| 496 |
o /data/opt/dispatchmail/bin/postmessage |
| 497 |
--- snip --- [/var/log/mail.log] |
| 498 |
Mar 8 07:26:40 quepasa sm-mta[30953]: h286Q5eE030946: to=|/data/opt/dispatchmail/bin/dispatchmail, ctladdr=<links-computing@netfrag.org> (1014/1014), delay=00:00:32, xdelay=00:00:22, mailer=prog, pri=47232, dsn=5.3.0, stat=unknown mailer error 2 |
| 499 |
Mar 8 07:26:41 quepasa sm-mta[30953]: h286Q5eE030946: h286QfeD030953: DSN: unknown mailer error 2 |
| 500 |
Mar 8 07:26:47 quepasa sm-mta[30946]: h286Q5eG030946: collect: premature EOM: unexpected close |
| 501 |
Mar 8 07:26:47 quepasa sm-mta[30946]: h286Q5eG030946: collect: unexpected close on connection from pD9E77CD4.dip.t-dialin.net, sender=<andreas.motl@ilo.de> |
| 502 |
--- snip --- |
| 503 |
Can't locate News/Article.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.0 /usr/local/share/perl/5.8.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.0 /usr/share/perl/5.8.0 /usr/local/lib/site_perl .) at ./postmessage line 8. |
| 504 |
BEGIN failed--compilation aborted at ./postmessage line 8. |
| 505 |
x perl -MCPAN -e "install News::Article" |
| 506 |
o /data/opt/dispatchmail/bin/buildmail |
| 507 |
Can't locate MIME/Lite.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.0 /usr/local/share/perl/5.8.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.0 /usr/share/perl/5.8.0 /usr/local/lib/site_perl .) at ./buildmail line 7. |
| 508 |
BEGIN failed--compilation aborted at ./buildmail line 7. |
| 509 |
x perl -MCPAN -e "install MIME::Lite" |
| 510 |
o /data/opt/dispatchmail/bin-tests/build_dispatch_mode mail2news alt.test |
| 511 |
DesignPattern::Bridge->load: Can't locate mixin/with.pm in @INC (@INC contains: /data/libs/nfo/perl/libs /etc/perl /usr/local/lib/perl/5.8.0 /usr/local/share/perl/5.8.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.0 /usr/share/perl/5.8.0 /usr/local/lib/site_perl .) at /data/libs/nfo/perl/libs/Mail/Audit/Dispatch/Newsgate.pm line 6, <STDIN> line 16. |
| 512 |
BEGIN failed--compilation aborted at /data/libs/nfo/perl/libs/Mail/Audit/Dispatch/Newsgate.pm line 6, <STDIN> line 16. |
| 513 |
Compilation failed in require at (eval 6) line 1, <STDIN> line 16. |
| 514 |
BEGIN failed--compilation aborted at (eval 6) line 1, <STDIN> line 16. |
| 515 |
(/data/libs/nfo/perl/libs/Mail/Audit/Dispatch.pm:193) |
| 516 |
Can't locate object method "Newsgate" via package "Mail::Audit::Dispatch" at /data/libs/nfo/perl/libs/Mail/Audit/Dispatch.pm line 194, <STDIN> line 16. |
| 517 |
x perl -MCPAN -e "install mixin" |
| 518 |
o check okay: |
| 519 |
--- snip --- [/var/log/mail.log] |
| 520 |
Mar 8 07:45:55 quepasa sm-mta[31471]: h286jNeD031413: to=|"/data/opt/dispatchmail/bin/dispatchmail --base=/home/joko/virtual/joko_mail", ctladdr=<joko_mail@localhost> (1000/100), delay=00:00:32, xdelay=00:00:05, mailer=prog, pri=577260, dsn=2.0.0, stat=Sent |
| 521 |
--- snip --- |
| 522 |
|
| 523 |
o @lookup Data::Match - Complex data structure pattern matching [by Kurt A. Stephens] |
| 524 |
@see also perl, Array::PatternMatcher, Data::Compare, Data::Dumper, Data::DRef, Data::Walker |
| 525 |
|
| 526 |
o make up a notation which can explicit describe component far away |
| 527 |
e.g. CPAN--Hash::Merge |
| 528 |
|
| 529 |
o @lookat News::FormReply News::FormArticle News::AutoReply |
| 530 |
|
| 531 |
x updated phpDocumentor to version from cvs |
| 532 |
o trying to get uml-rendering working |
| 533 |
x apt-get install dia |
| 534 |
x apt-get install dia2code |
| 535 |
|
| 536 |
x setup org.droogs--Autodia: location http://www.droogs.org/autodia/ |
| 537 |
#> cd /tmp |
| 538 |
#> /data/opt/tools/Autodia-1.4/autodia.pl -l php -i * -p /data/www/virtual/netfrag/docs/nfo/code/flib -O |
| 539 |
x setup CPAN--Template: perl -MCPAN -e "install Template" |
| 540 |
->CPAN--TT2 |
| 541 |
->CPAN--Splash! |
| 542 |
Which Splash! colour scheme would you like to use to build the |
| 543 |
documentation? Acceptable values are: |
| 544 |
Name Colours |
| 545 |
------------------------- |
| 546 |
default lilac/mauve |
| 547 |
aqua aqua/marine |
| 548 |
blue grey75/blue75 |
| 549 |
green grey75/green75 |
| 550 |
grey grey75/grey50 |
| 551 |
leon red75/orange/white/black |
| 552 |
red grey75/red75 |
| 553 |
Enter name of colour scheme: [default] |
| 554 |
->CPAN--AppConfig |
| 555 |
->CPAN--GD |
| 556 |
CPAN.pm: Going to build L/LD/LDS/GD-2.06.tar.gz |
| 557 |
NOTICE: This module requires libgd 2.0.5 or higher. |
| 558 |
->Debian--libgd2: apt-get install libgd2 libjpeg62 libpng2 xlibs zlib1g |
| 559 |
->Debian--debconf ->Debian--nethack-common ->Debian--xfree86-common |
| 560 |
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
| 561 |
Installing new version of config file /etc/X11/Xsession.d/99xfree86-common_start ... |
| 562 |
Adding system startup for /etc/init.d/xfree86-common ... |
| 563 |
/etc/rcS.d/S70xfree86-common -> ../init.d/xfree86-common |
| 564 |
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
| 565 |
Setting up X server socket directory /tmp/.X11-unix...done. |
| 566 |
Setting up xlibs (4.2.1-6) ... |
| 567 |
->CPAN--Math::Trig |
| 568 |
->Debian--libgd2-xpm: apt-get install libgd2-xpm libgd2-xpm-dev |
| 569 |
#> cd /.cpan/build/GD-2.06 |
| 570 |
#> make |
| 571 |
x some further library-patches: cd /usr/lib |
| 572 |
#> ln -s ln -s libperl.so.5.8 libperl.so |
| 573 |
#> ln -s libpng.so.2 libpng.so |
| 574 |
#> ln -s libfreetype.so.6 libfreetype.so |
| 575 |
#> ln -s libjpeg.so.62 libjpeg.so |
| 576 |
x test: |
| 577 |
#> ld -l png|jpeg|freetype|perl|X11 |
| 578 |
X11 still fails with make GD!!! |
| 579 |
#> cd /.cpan/build/GD-2.06 |
| 580 |
#> make |
| 581 |
/usr/bin/ld: cannot find -lX11 |
| 582 |
collect2: ld returned 1 exit status |
| 583 |
make: *** [blib/arch/auto/GD/GD.so] Error 1 |
| 584 |
#> apt-get install xlibs-dev |
| 585 |
#> make |
| 586 |
yai! |
| 587 |
#> make test |
| 588 |
t/GD..........ok 1/10libpng warning: Application was compiled with png.h from libpng-1.2.5 |
| 589 |
libpng warning: Application is running with png.c from libpng-1.0.12 |
| 590 |
gd-png: fatal libpng error: Incompatible libpng version in application and library |
| 591 |
#> apt-get install libpng2-dev |
| 592 |
#> apt-get install libjpeg62-dev |
| 593 |
... still the same error with "make test" |
| 594 |
#> apt-get install libpng3 libpng3-dev |
| 595 |
#> apt-get install libfreetype6-dev |
| 596 |
The first output xml is seen! Great! Let's move on to graphviz: |
| 597 |
Can't locate GraphViz.pm in @INC (@INC contains: /data/opt/tools/Autodia-1.4 /etc/perl /usr/local/lib/perl/5.8.0 /usr/local/share/perl/5.8.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.0 /usr/share/perl/5.8.0 /usr/local/lib/site_perl .) at /data/opt/tools/Autodia-1.4/Autodia/Diagram.pm line 336. |
| 598 |
#> apt-get install graphviz |
| 599 |
???#> perl -MCPAN -e "install Template" |
| 600 |
#> perl -MCPAN -e "install Graphviz" |
| 601 |
->CPAN--IPC::Run |
| 602 |
->CPAN--Graph |
| 603 |
->CPAN--Math::Bezier |
| 604 |
->CPAN--Heap |
| 605 |
Freetype Font's do not work! |
| 606 |
#> apt-get install freetype2-tools |
| 607 |
#> apt-get install libttf-dev |
| 608 |
#> apt-get install xfonts-scalable |
| 609 |
#> apt-get install xfonts-base |
| 610 |
#> apt-get install ttf-freefont |
| 611 |
Freefont Serif, Sans and Mono Truetype fonts: |
| 612 |
A set of free high-quality TrueType fonts covering the UCS character set. |
| 613 |
These fonts are similar to the (in)famous Helvetica, Times and Courier fonts. |
| 614 |
http://packages.debian.org/unstable/x11/ttf-freefont.html |
| 615 |
(#> apt-get install ttf-xfree86-nonfree ttf-larabie-deco ttf-larabie-straight ttf-larabie-uncommon) |
| 616 |
#> defoma-font register-all /etc/defoma/hints/ttf-freefont.hints |
| 617 |
o enhance: |
| 618 |
root@quepasa:/home/joko/public_html/test# ./.autodiarc |
| 619 |
getting pattern for php |
| 620 |
using directory : /data/www/virtual/netfrag/docs/nfo/code/org.netfrag.glib |
| 621 |
recursively searching files.. |
| 622 |
o the "php-pattern" should also contain namespaces and stuff |
| 623 |
(components gets instantiated by either 'mkObject' or 'php::mkComponent') |
| 624 |
make this possible! |
| 625 |
|
| 626 |
o quick (javascript) search for netfrag.org and packages.debian.org (xul?) |
| 627 |
|
| 628 |
o phpDirectoryIndex: include Joshua Eichhorns 'auth' [[http://cvs.joshuaeichorn.com/cvsweb.cgi/auth/]] |
| 629 |
|
| 630 |
@lookat http://cvs.joshuaeichorn.com/cvsweb.cgi/phpXmlTransform/ |
| 631 |
|
| 632 |
o autodia: enhance with "projects" |
| 633 |
<-> couple with phpDocumentor |
| 634 |
|
| 635 |
o phpDocumentor: try php 4.3.0 for having cross-indexed browsable source as an additional feature ;-) |
| 636 |
o <-> link to pages prepared by Autodia |
| 637 |
o add additional browser in top left frame for cross-domain-browsing (having multiple apis beside each other) |
| 638 |
o the html-title! (make it unique!!!) |
| 639 |
|
| 640 |
o for Autodia: |
| 641 |
o resize images to a) 800x600 portrait and b) DIN A 4 square or s.th.l.th. |
| 642 |
=> x .autozoom -> zoomall -> zoommulti -> zoomone |
| 643 |
o stamp picture with header and footer (little expressions for including predefined title, current filename, date, etc.!) |
| 644 |
o idea: render as SVG??? |
| 645 |
o class- and package-diagrams: |
| 646 |
o "Class" for relationships of Code- and DB-Schema-classes |
| 647 |
o "Package" for relationships of code-packages |
| 648 |
o integrate with phpDocumentor: |
| 649 |
/data/opt/tools/phpdocumentor/phpDocumentor/Converters/HTML/frames/templates/phpedit/templates/left_frame.tpl |
| 650 |
o Autodia-TODO: |
| 651 |
Add ability to split projects into multiple diagrams and group contents of |
| 652 |
a diagram/subdir into system boxes - much improving clarity in big |
| 653 |
projects. |
| 654 |
|
| 655 |
o glib-namespace aufräumen! |
| 656 |
|
| 657 |
o twingle |
| 658 |
o what about "<pre>"-blocks? |
| 659 |
o what about non-html-tags (e.g. <optional-var-name>)? |
| 660 |
=> we'll probably need a html-tag-db to solve this |
| 661 |
o establish as RunnerAgent and IntervalRunnerAgent on quepasa! |
| 662 |
|
| 663 |
o phpDocumentIndex |
| 664 |
o recognize symlinked directories!!! |
| 665 |
o integrate with ImageZoom written for Autodia |
| 666 |
-> manipulate images: zoom, rotate |
| 667 |
o sort order: |
| 668 |
o default: show directories on top |
| 669 |
o make changable through columns |
| 670 |
o option to force view of hidden files (e.g. dot-files) |
| 671 |
o 24h-time-format (no AM/PM) |
| 672 |
o UML-Class-diagram-icon for tutorial!!! |
| 673 |
|
| 674 |
o modify /etc/hosts entry by rule!!!! |
| 675 |
|
| 676 |
o Yakka: automate reinstallation (new IntervalRunnerAgent) of libxml2 |
| 677 |
#> dpkg -i /home/bareface/public_html/yakka/data/libxml2_2.4.19-4_i386.deb |
| 678 |
#> /etc/init.d/apache restart |
| 679 |
|
| 680 |
o autozoom/runzoom |
| 681 |
o from (e.g. test6/) |
| 682 |
o to (e.g. test6/zoomed/) |
| 683 |
|
| 684 |
o global "last-recent-error"-page for admin to view errors occouring |
| 685 |
->SystemErrors |
| 686 |
->StepProcessing: ./.runrc: update|build|publish |
| 687 |
|
| 688 |
o clean up disks!!! |
| 689 |
o h1.service.netfrag.org |
| 690 |
o quepasa.netfrag.org |
| 691 |
|
| 692 |
o natraj/sorceress: server-consolidation? |
| 693 |
|
| 694 |
o monitor regularly: http://netfrag.org/docs/code/api/org.netfrag/errors.html |
| 695 |
|
| 696 |
o DataSource::Generic <-> ObjectList!!! |
| 697 |
|
| 698 |
o Yakka: (javascript-control): |
| 699 |
o let CTRL + ENTER make a new para |
| 700 |
o let CTRL + CTRL (double-hit) make a new page from WikiWord left of the cursor (splash into a new DHTML page!) |
| 701 |
|
| 702 |
x root@quepasa:/data# apt-get install pdumpfs |
| 703 |
|
| 704 |
o final solution for the libxml-problem? |
| 705 |
root@quepasa:/home/service/backup# apt-get --fix-broken --show-upgraded --simulate dist-upgrade |
| 706 |
Reading Package Lists... Done |
| 707 |
Building Dependency Tree... Done |
| 708 |
Correcting dependencies... Done |
| 709 |
Calculating Upgrade... Done |
| 710 |
The following packages will be REMOVED: |
| 711 |
libxslt1 php4-domxml |
| 712 |
0 packages upgraded, 0 newly installed, 2 to remove and 0 not upgraded. |
| 713 |
Remv libxslt1 (1.0.27-1 ) [php4-domxml ] |
| 714 |
Remv php4-domxml (4:4.2.3-11 ) |
| 715 |
root@quepasa:/tmp# apt-get install pdumpfs |
| 716 |
Reading Package Lists... Done |
| 717 |
Building Dependency Tree... Done |
| 718 |
You might want to run `apt-get -f install' to correct these: |
| 719 |
Sorry, but the following packages have unmet dependencies: |
| 720 |
libxslt1: Depends: libxml2 (>= 2.5.0-1) but 2.4.19-4 is to be installed |
| 721 |
php4-domxml: Depends: libxml2 (>= 2.5.0-1) but 2.4.19-4 is to be installed |
| 722 |
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). |
| 723 |
x dpkg --force-depends -r libxml2 |
| 724 |
x dpkg-deb -x libxml2_2.4.19-4_i386.deb here |
| 725 |
x dpkg-deb -e libxml2_2.4.19-4_i386.deb here |
| 726 |
|
| 727 |
|
| 728 |
|
Parent Directory
| 
Revision Log
